Galvanizing Coating

1
PRTXIOO Protective coatingsfc solution providers
Galvanizing Coating - How to Apply Galvanizing
Paint on Metal?
Galvanizing coating is the method of applying to
steel or iron a protective zinc coating to
prevent rusting. This paint is used mainly for
galvanized metal. If painting is hard, then
galvanized metal painting is even harder. This is
because the oil coating protects this surface so
as to avoid rust. Protexion is an India's leading
supplier of galvanizing coating and paint
designed for use on all types of metal, to
provide protection against corrosion, and various
other problems. Galvanic protection works by
covering the steel surface with a metal that will
preferentially corrode instead of the steel when
the surface comes in contact with an electrolyte,
usually water. Metal is extremely prone to
rusting if the correct precautions are not taken
therefore we like to make sure that you have only
the very best galvanizing paint available to
protect your metal surfaces and structures from
the damage that can be caused by rust. A
galvanizing coating reduces the maintenance cost
the years of protection for structural and
equipment surfaces eliminates the need for
constant scraping, wire brushing and repainting.
GALVANIZING
COATING
PRTXIOn
Protective coatings solution providers
CONTACT
www.protexion.in
91-9011958800
Steps To Apply Galvanizing Paint on Metal As we
described below, galvanized surfaces must be
handled carefully before applying the paint.
Otherwise, adhesion will cause you too many
problems later 1. Wash the metal surface
Firstly, use hot and soapy water to wash the
surface. Then wait for it to dry completely.
After that, use a mixture of water and 2 ammonia
to clean the surface again. This process could
take you a few hours, yet it is necessary for the
next steps.
www.protexion.in
nilesh_at_protexion.in
2
PRTXIOO Protective coatingsatsolution providers
Make sure to check if the galvanized metal comes
with chromates or other passivating pretreatments
as these could affect the adhesion of the
paint. 2. Sanding Sand the entire surface to
make sure it is cleaned from dust. Then wipe it
out using tack cloths. Next, the adhesion could
be reduced if the galvanized surfaces are too
shiny and smooth. A lot of people skip this one
causing serious damages. We recommend you to make
it dulled and roughened by using some chemical
etching solution. 3. Apply the primer These
primers will bond the paint into the galvanized
surface. You will clearly understand the
instructions on the product packaging before
using it. It provides you with the instructions
on how to use it and how long it takes to dry the
primer. Galvanized spray paint is the best
choice. Spray the below items one part at a time
from top. If you see any drips, immediately
delete them. Depending on your intent, you can
add two to three primers. Remember to let it dry
before applying a new coat. 4. Applying the
paint If you have done the above steps as we
instructed, this step is so much easier. You
should also use the same technique as applying
the primer. You would also want to add the paint
from the same brand as the primers to improve
compatibility. Although this is the last step,
don't be rushed. Paint it gradually to finish the
job perfectly. Refer to the products we recommend
above to find the suitable one for you. When you
are looking for a galvanizing paint then take
advantage of protexion's excellent products offer
at great prices. If you require galvanizing
coating that protects against rust, then at
Protexion we ensure that all of the products that
we have available are only best on the market as
we like to be sure that we are providing only the
very best in customer satisfaction and we know
the only way to achieve that is to provide
quality products at excellent prices and that is
exactly what we do. Our main intend is to supply
products that have made by only the very best
galvanizing coating manufacturers in the industry
who we know are trustworthy and reliable when it
comes to supplying high quality galvanizing paint
every time. If you have any enquiry doesn't
hesitate to get in touch and speak to one of the
Protexion team who will be more than happy to
help. Contact us 9011958800 Visit us
www.protexion.in/cold-galvanizing-coating.php
www.protexion.in
nilesh_at_protexion.in