rapid manufacturing company in China

1
Delivering results, reliability, and rock solid
dependability
2
Rapid tooling including prototype mold, RIM, ABS
mold and Aluminum mold ,which is good for low
volume production from 1k to 10K. This process is
the best choice if you have a project with the
small numbers. Prototype mold is also called the
injection mold. The tool life of prototype mold
is shorter than mass production mold, which means
the molds will be reduced in some machining
process. For example, more than one cavity can
share with a universal mold base. Also, we will
choose different grades of steel material
according to your products quantity, quality and
surface finishing requirement. This is the best
way for shortening processing time and saving the
cost of the tool. To know more about our rapid
tooling services you can visit our website.
Tags rapid tooling services
3
Prototype mold is also called the injection mold.
The tool life of prototype mold is shorter than
mass production mold, which means the molds will
be reduced in some machining process. For
example, more than one cavity can share with a
universal mold base. Also, we will choose
different grades of steel material according to
your products quantity, quality and surface
finishing requirement. This is the best way for
shortening processing time and saving the cost of
the tool.
To know more visit https//e-make.co/rapid-tool
ing/
4
In order to verify the appearance, structure and
dimensions of new product, to see if the new
products design is perfect or not, rapid
prototyping is the first step. Because we can
recognize the design problem when we test the
prototype. So, in other words , rapid prototyping
can reduce the risk of developing mold. According
to the material used for making prototype , there
are plastic prototype , metal prototype and
rubber prototype. Plastic prototype is making out
of plastic material , such as television ,
displayer, etc. Rubber prototype is making out of
rubber material , mainly be use for displaying
the appearance of product , such as car ,phone ,
toy , etc. Metal prototype is making out of
aluminum alloy , stainless steel , etc.
To know more visit https//e-make.co/rapid-tool
ing/
5
It is mainly be used for making high-grade
product, such as laptop. According the effect of
the prototypes, there are exterior prototype,
structural prototype and functional prototype.
Exterior prototypes are solid and without
functionality, which made for checking the
appearance of the product. Structure prototypes
are hollow, which made for checking the the
rationality of the product structure. It will be
functional if install electronic components into
the structure prototype. Functional prototypes
need to has same appearance, structure and
functionality as the finished product. That is
why machining functional prototypes is harder
than the exterior prototype and structural
prototype.
To know more visit https//e-make.co/rapid-tool
ing/
6
The prototype, or product model, may also be
called a product sample. Why do people need to
make a prototype? Making prototype is a key link
in product design process, which provides
reliable material basis for guaranteeing the
feasibility of product design and product
preparation for trial production. The main reason
that follows to introduce to make prototype.
Because the prototype can assemble, it can
directly reflect the reasonable structure, as
well as the difficulty of installation.
Facilitate early detection of problems, problems
to solve.
To know more visit https//e-make.co/rapid-tool
ing/
7
Thank You
For More Information Visit On Website Through
Given Link
https//e-make.co/rapid-tooling/