How to Outsource anodizing

1
Indaco caots

• www.indacocoats.com
• Aluminium Anodizing Titanium Anodizing Indaco
  Coats

2
How to Outsource

• Anodizing is an electrochemical process by which
  the surface of the metal is oxidized. Anodizing
  helps, prevent the metal body from corrosion and
  overall it enhances the beauty. Almost all the
  metal gadgets that we have are anodized. The
  ships are anodized to prevent corrosion in marine
  water, we have anodized utensils, the medical
  equipment are anodized too. The majorly used
  metal in anodizing is aluminium, titanium is
  second most used material. There are other metals
  too, which can be anodized like magnesium, not
  all the substance can be anodized
• Anodizing is bit complicated chemical process, it
  is important to care of certain precaution before
  anodizing

3

• Anodizing is a complicated chemical process, if
  you have a manufacturing business but your
  products are not high quantity, setting up an
  anodizing team is not recommendable, all you can
  do is hire an anodizing service provider.
• General if your product is not an aluminium or
  titanium, it is difficult to find an anodizing
  service provider.
• Good anodizers are difficult to find, in
  anodizing there are tanks, which are filled with
  the metal that is to be anodized, so in the haste
  to make profit they may put your metal with
  different metal to fill up the tank, for instance
  your product is of aluminium metal, but your
  product is not occupying the whole space of the
  tank, the anodizer may stuff other metal, which
  may be of different composition.

4

• This may deteriorate the quality of your product,
  hence it is important to take care of that.
• The important thing that must be taken care of,
  either by your side or by the anodizer and that
  is, cleaning the metal, it is very essential that
  all the metal to be dipped in the tank, are
  clean, they should not have any dust particles or
  paint or oil or anything on the surface, this may
  affect the quality of anodizing.
• Break all the sharp edges the, any sharp cut,
  less than 0.005 can break the anodize, the edge
  will not be anodized, the metal surface will be
  visible
• Choose the anodizer according to your size, there
  are anodizer who have work very large scale. If
  your work is limited, like few parts a day, then
  try to stick to small anodizing service
  providers, who can serve you better.

5

• Anodizing is inexpensive only when done in bulk,
  if you are not dealing bulk it can cost you more.
  In case you do not have bulk production, refrain
  from sending your goods every day for anodizing,
  try to hold it until it becomes large in
  quantity, it will help you to, reduce your
  product cost.
• Do not opt any anodizer until you get satisfied
  with their sample work. Make sure that you check
  the portfolio of the service provider.
• Indaco metal coats is most trusted anodizing
  service provider in India. Indaco coats provides
  best solution in aluminium and titanium anodizing
  electropolishing and surface finishing. Indaco
  coats for quality metal anodizing. If you have
  any work related anodizing you can easily reach
  out www.indacocoats.com