Five Tips for Fire and Smoke Damper Compliance

1
5 Tips for Fire and Smoke Damper Compliance
2
Know inspection requirements
The first thing is to know the requirements.
There is no doubt in this that one must know the
inspection requirement. To do proper maintenance,
you need to know about the product in detail.
Without having the proper knowledge, it is not
possible to maintain the fire and smoke dampers.
NFPA 80 105 provides the requirements for the
inspection. In the case of hospitals, these need
to be inspected every 6years and 4years in case
of hospitals.
3
Set up a maintenance plan
One must set up a proper maintenance plan for it.
A routine inspection of the fire and smoke
dampers will ensure that equipment is working
properly. Further, it will ensure that it is
working and functioning as per the design. In
case you find that the fire damper inspection is
a huge work complete, then it is better to hire
an outsider professional to complete the task.
4
Perform visual and physical inspections
When the inspection is done visually, it confirms
that all the tracks are unharmed. The tracks have
no dust and debris and all the nuts and bolts are
lubricated properly. Further, it also confirms
that the tracks have not received any damages or
not. In the case of the physical inspections,
often the damaged fusible links are checked. In
case of the closed blades, the damper needs to be
reopened and the fusible link should be replaced.
5
Maintain proper documentation
No matter the service is performed by in-house
staff or outside one, there must be written
documentation for it. The document will show that
all dampers were properly tested, maintained, and
are functioning as per the requirement. Further,
the documentation must include locations, serial
numbers, model numbers, damper sizes, access
sizes, failures, and requirements. The more
information it will have is better. Ensure that
all the reports are accurate and genuine.
6
Schedule or coordinate timely repairs
Of course, with the time the damper will not work
in the proper way. In the case of excessive
rusting, often the dampers may fail to work. All
the inoperable dampers must be repaired quickly.
In case the damper fails during an ongoing
inspection, the repair must be done as soon as
possible. It is always advised to go for the
routine investigation to make sure that it is
working fully fit.
7
Thank You
To know more visit https//bmfire.ie/fire-damper-
maintenance-inspection/