Stainless Steel Ball Bearing

1
WELCOME TO xzbearings.com
E support_at_xzbearings.com
M 86-13524742876
W www.xzbearings.com
2
High Performance Zirconia Full Ceramic Insert
Ball Bearing
Al2o3 ceramic balls
6300CE full ceramic Silicon Nitride bearing
6300CE full ceramic Silicon Nitride bearing
thin section wall ball bearing 6800 series
E support_at_xzbearings.com
M 86-13524742876
W www.xzbearings.com
3
While selecting a bearing, consider the type,
lubricant, any shielding/sealing, grade, and the
basic load rating. In a stationary position if
the bearing will be subject to shock, consider
its static load rating as well. Shock loading in
the bearing life will also be a factor while
operating. Both in inch dimensions and
millimeter, ODs match basic shaft sizes, and
housing and bearing bores along with bearings
from hybrid ceramic ball bearing supplier are
available corresponding to these basic sizes.
E support_at_xzbearings.com
M 86-13524742876
W www.xzbearings.com
4
In a variety of configurations such as
thin-section bearings, duplex bearings, mounted
units, etc as well as special designs, Ball
bearings are available. To the specific
applications such as instrument bearings and
requirements of specific industries such as
pharmaceutical, food, and aerospace, etc they are
also tailored. With their adjoining faces ground,
Duplex bearings employ matched bearing pairs such
that during installation, the bearings may be
preloaded. To increase system stiffness or
provide absolute radial shaft location, this
offers a means of reducing the internal bearing
clearance to nearly zero.
E support_at_xzbearings.com
M 86-13524742876
W www.xzbearings.com
5
With enough clearance Standard bearings are made
such that without affecting bearing operation,
the inner ring can be lightly pressed onto a
shaft sometimes before installation, bearings
are heated or to shrink the bearing into position
and provide room enough, shafts are cooledthese
methods must be judiciously applied. When on the
same shaft, two bearings are mounted hence, to
allow for thermal expansion of the shaft relative
to any housing, one needs the ability to axially
move.
E support_at_xzbearings.com
M 86-13524742876
W www.xzbearings.com
6
E support_at_xzbearings.com
M 86-13524742876
W www.xzbearings.com
7
Contact Information
Xinzhou Bearing Industry Address 4F-E, South
Factory Buiding, 168, North Huancheng Rd,
Fengxian, Shanghai, China. Website
http//www.xzbearings.com/
E support_at_xzbearings.com
M 86-13524742876
W www.xzbearings.com