How to Fix System Turns on But No Display?

1
How to Fix System Turns on But No Display?
2
When you are using your PC, and suddenly your
screen may turn black due to some reason such as
corrupt RAM, outdated drivers or damaged
peripherals etc. It is a very annoying and
frustrating issue so, if you are facing it, then
follow this article and learn about its
solutions. Connect the Monitor Again to the
System Hold the Power key until the system
switches off. After that, detach the video cord,
which attaches the screen to the system. You
should look at the port connectors on the
system then on the monitor. Then check whether
the video cord is corrupted. In case the video
cord is OK, connect the system again to the
screen. In case you have another video cord
applicable, attempt connecting both devices
through the new cord. Now, attempt enabling the
system to view whether it should boot
usually. Disconnect the Peripherals Hold the
power key until the Switch off the system. After
that, detach each peripheral such as a mouse,
scanner, or printer. Now, attempt to enable the
system once again. In the case of the system
boots successfully, one of the peripheral is
causing the issue. You can install all devices
again back to the system and check them at once.
Thereafter, you will locate the particular device
that causes the issue.
3
Install the RAM again Press the Power key until
the system switches off. After that, detach the
AC power cable through the power supply, then
invoke the system case. Now, go to the
motherboard, delete the RAM through the slot of
memory. Later, place the RAM back in the
slot. You should attach the AC power cable to the
power supply, then switch on the system. Reset
the BIOS Settings to Default Hold the Power key
until the PC switches off. Thereafter, detach the
AC power cord through the power supply, then
invoke the system case. Once you reach the
motherboard, remove the CMOS battery. You have to
wait for a minimum of 5 minutes and install the
CMOS battery again. Now, attach the AC power
cable to the power supply, then switch on the
system to check whether the issue continues. Mia
Watson is an avid technical blogger, a magazine
contributor, a publisher of guides at Blogs Book,
and a professional cyber security analyst.
Through her writing, she aims to educate people
about the dangers and threats lurking in the
digital world. Suorce https//scoutq.com/how-to-
fix-system-turns-on-but-no-display/