10 Basic Electrician Tools - Mathaji Hardware

1
10 Basic Electrician Tools - Mathaji
Hardware
Electricians are those who help keep our homes
and offices illuminated. They are those who
install the lightings correctly they are those
who we run to for help in case of any repairs,
and they are those who we rely upon for
maintaining our electrical systems. But, as much
as we rely on them, they rely on their tools.
Lets take a look at some must-have electrical
maintenance tools that electricians use.
Screwdrivers Screwdrivers are the most basic
equipment that electricians use for tightening
or loosening various pieces of hardware.
Screwdrivers can be simple or versatile with
interchangeable bits. Pliers Pliers are the
basic tools that every electrician possesses,
which are used for cutting, gripping, twisting,
bending, and straightening
2
wires. A variety of pliers are available in an
electricians toolbox, such as nose pliers,
side-cutting pliers, and reaming pliers for
tightening nuts and bolts, fittings, and
caps. Drill Electricians also generally carry a
drill with them, in case any lighting fixtures
need to be installed. Industry-specific drills
include a handheld electric drill that can help
affix specialty bits. Voltage testers When
electrical work is in process, the electrical
power should be cut off in key sections to make
it safe for the electrician. A handheld voltage
tester helps test outlets for power so that they
know whether they are safe to work on or not.
Also, the tester helps to confirm is the power
has been restored back after the work is done.
These testers are also used to identify if there
is power in a circuit, or the circuit is
damaged. Flashlight Flashlights are a basic
tool for all, not only electricians, as they help
to see in the dark. In addition to the dark,
electricians need to keep a flashlight to be
able to see through a complex system of wires to
identify the right wire they want to work
with. Tape measure Tape measurement is
absolutely important for any kind of hardware.
Whether it is to mark something or cut wires the
exact length, or anything else, it is essential
for an electrician, or in fact any hardware
contractor, to carry a tape measure at all times.
A simple basic retractable tape measure is
mandatory, but other than
3
that, various other models like those with
magnetic tips or multi- step locks could be kept
in the toolbox too. Electrical tape This is an
adhesive tape that is used to insulate wires or
other materials that conduct electricity. This
tape prevents the electrical current from
passing to other wires, or possible electrocution
when touching live wires. This makes electrical
tape mandatory too. Fish tape Fish tape is
used to run wiring between gang boxes or other
electrical components through conduit piping. It
is housed in a retractable coil and can be fed
through installed conduit piping. When the end
of the fish tape appears on the opposite side,
wiring can be hooked to it, and the tape can be
retracted. Fishing rods No, this has nothing to
do with the rods that are used to catch fish.
These are instead rods that help electricians
install wire through walls, above ceilings, or
below carpets. These are fiberglass rods having
hooks on the end for easy maneuvering. Terminal
blocks These modular insulated devices are used
to group multiple wires together, when wiring
needs to be connected to ground, or when
electrical switches and outlets need to be
connected to the mains. All these basic
electrician tools can be acquired at any
electrical shop. Mathaji Hardware is the best
electrical shop in Bangalore where you can get
all the best quality electrical tools
4
and equipment required, whether you are an
electrician or a homeowner. For more information
, visit https//www.mathajihardwareonline.in/