Alumina Metallic Ceramic Heating Element

1
Alumina Metallic Ceramic Heating Element
www.fullchance.com
2
Fullchance is an acronym for High-temperature
co-fired ceramics Fullchance ceramic heating
element is made up of high melting point metal
heating material such as tungsten, molybdenum or
molybdenum manganese and 92-96 alumina ceramic
substrates.  The metal heating resistance slurry
is printed onto the tape casting ceramic green
body according to the design requirement, several
layers of ceramic green body are then laminated
together and is fired at 1500 1600 ? high
temperature,  with the aid of 4-8 sintering
additive, to form the alumina ceramica heater
element. .

• Using Real Life Stories Christian Testimony books
  and testimonies has  taken our witnessing to the
  next level. 

3
This product features in corrosion-resistant,
withstanding high temperature, long life cycle,
energy efficient, uniform surface temperature,
excellent thermal conductivity and thermal
compensation rate. Alumina ceramic heating
element doesnt contain harmful substances such
like lead, cadmium, mercury, hexavalent
chromium, polybrominated biphenyls,
polybrominated diphenyl ethers, etc., and is in
compliance with EU RoHS and other environmental
requirements.
4

• With the advent of the integration of electronic
  components, electronic devices have posed higher
  demands on circuit miniaturization, high-density,
  multi-function, high reliability, high speed and
  large power. Co-fired multi-layer ceramic
  substrate meets all these requirements so it has
  been used in a wide range of applications in
  recent years. Co-fired multi-layer ceramic
  substrate can be divided into high temperature
  co-fired ceramic (Fullchance) substrate and low
  temperature co-fired multi-layer ceramic (LTCC)
  substrate.
• Compared to LTCC, high temperature co-fired
  ceramics (Fullchance) has higher mechanical
  strength, higher wiring density, better chemical
  stability, higher thermal dissipation coefficient
  and lower cost and is widely used in the heating
  and packing applications requiring higher thermal
  stability performance, less high temperature
  volatile gases and better sealing. High
  temperature co-fired ceramic heating element is a
  good alternate of alloy wire and PTC ceramic
  heating element and component. 

5
(No Transcript)
6
(No Transcript)