3 Important Techniques of Interior Concrete Finish Walls

1
3 Important Techniques of Interior Concrete
Finish Walls
2

• Interior Designers always looks for creates
  something amazing with Experiments. Interior
  Concrete Finish Walls is one of the classic yet
  trending options in the market, which are used
  for Living room, Bedroom, Kitchen, Bathroom and
  even exterior area. There are mainly 3 types of
  Techniques to apply in this finishes.

3
Troweling / Floating

• First, the Concrete tooled with a screed, after
  that Concrete finishers used trowels to smooth
  and fine-layer the concrete surface.
• This process is done with two options depends on
  the work area, in a small area it can be done
  with manual, while work area on the big structure
  or in Industrial area the mechanical options is
  the make the work done.

4
Edging

• The edging process allows the concrete to be
  rounded or angled, and the joints are made so
  that the cracks in the concrete are minimized.
• A special type of tool is used for this process,
  as well as a little mastery is required to
  operate it. Edging also creates an amazing
  classic block design.

5
Broom Finish

• Broom Finish is a simple but important technique
  to make concrete surfaces slip-resistant. This
  process is applied after placement, troweling and
  Leveling of the concrete.
• After smoothing steps, a broom is dragged on the
  surface to make small ridges that helps in
  traction control while the Surface is wet.
• Without a broom process, the direct concrete
  finish can be dangerous when liquids are on the
  surface.

6
FIND US
www.sds-me.com