Canon Pixma TS202 Setup

1
Canon Pixma TS202 Setup
2
Canon Pixma TS202 Printer

• Canon Pixma TS202 is a color inkjet printer that
  can perform high-end printing at low cost. It can
  only be connected via a USB cable. The printer
  supports four colors namely cyan, magenta,
  yellow, and pigment black. Keep reading through
  the page and get to know how to set up and handle
  the printer.

3
How to Set Up Canon Pixma TS202 Printer?

• Unpack the carton and take the printer out.
• Keep it on a flat surface and remove all the
  packaging material.
• Connect the printer to a nearby power source and
  turn it on.
• Lower the front cover, and wait until the
  cartridge holder halts.
• Unwrap the new FINE cartridges and insert them
  into the cartridge holder.
• Make sure the cartridges are firmly fixed into
  their slots.

4

• The black cartridge should be inserted into the
  right slot and the color cartridge into the left
  slot.
• Close the cover, and continue with the following
  steps to load the paper.
• Raise the rear input tray, and slide the paper
  width guides out.
• Keep a stack of blank paper in the tray and push
  it in.
• Adjust the guides such that they rest against the
  edges of the paper.

5

• Pull the output tray, and draw the extender. The
  printer is now all set for the connection.
• Click Here -gt Canon TS202 Driver Manual
  Download
• For More -gt https//usa-canon-printer.support/can
  on-pixma-ts202

6

• Thank You!!!