Hi-Tech Engineering Services L.L.C

1
HI-TECH ENGINEERING SERVICES L.L.C
http//hitechuae.com/
2
Fasteners

• Fastener is a type of mechanical component used
  for fastening and is commonly used. Fasteners are
  commonly used in a number of industries. In
  general, fasteners are used to build
  non-permanent joints that is, joints that can be
  replaced or disassembled without damaging the
  joint components. Hi-tech Engineering services is
  one of the leading fasteners Manufacturers
  Suppliers in UAE

http//hitechuae.com/
3
Importance of Fasteners

• Fastener is a key hardware feature that is used
  almost anywhere, whether it's your door hinge or
  any household device, whether it's automotive,
  machinery, building, infrastructure or some other
  object that needs assembly, it's sure to be
  fitted with fasteners. What if a single fastener
  is loose or broken? It is likely to affect the
  whole system or cause adverse effects. So
  strength, toughness, rigidity depends on the type
  of material that we are going to use, or what the
  coating should be, or what the size of the
  coating should be, since the choice of correct
  fasteners reduces the stress concentration that
  reduces fatigue.

http//hitechuae.com/
4
Types of Fasteners

• Bolts and Nuts
• A bolt is a threaded fastener that is often
  coupled to a nut. The bolts have an external male
  thread and the bolts have an internal male
  thread. The bolt consists of the crown, the
  cylindrical body and the threads along its
  circumference. Bolts usually have a flat head,
  which means there is no grove on the head.
• 2. Screws 
• These are the fasteners that make their own
  threads when fastening to the material. Usually,
  they have a head and a helical threaded shank.

http//hitechuae.com/
5

• 5. Anchors Fasteners
• They are commonly used in the building and
  masonry or stone industries and are used to
  connect structural and non-structural materials
  to concrete or other materials. This is usually
  built by digging a larger hole, comparing it to
  the fastener diameter, then in the base material,
  and then the anchor is placed into the hole at a
  depth known as the embedment depth.
• 6. Inserts
• These are usually cylindrical threads, also known
  as thread bushings, which are used for several
  purposes, such as securing a long-lasting link
  between the different materials or restoring
  stripped threads.

http//hitechuae.com/
6

• Clevis Pins and Cotter Pins
• These are the steel pins or the cylindrical shaft
  head. These are used to hold machine components
  in a precise position or alignment. They consist
  of a hole in the shaft in which a cotter pin is
  inserted and bent to serve as a staple.

http//hitechuae.com/
7

• THANK YOU

http//hitechuae.com/