HP Printer Error State

1
How to Overcome HP Printer in Error State Issue?
Heading for an important business meeting? But
oh! You forgot to take that printout. You
approach your HP printer and there it is, HP
Printer in Error! flashing on the
monitor. Facing issues like this can take a toll
on your performance. Thats why it is important
to rule out any chance that stops you from doing
what is important. In this blog, we will discuss
how HP printer errors like the HP Printer Error
State itself, can be resolved and what preventive
measures can one follow to avoid the same in the
future. But first,
2
What is HP Printer Error State?
HP Printer Error State usually flashes on your
monitor when the printer is not functioning.
Either it may be turned off, not connected to the
PC using the cable or wirelessly, or some
connector ports have malfunctioned. There may
also be a chance that the hp printer support
drivers are outdated and you would need to update
them. Whatever be the case, here is what you can
do to avoid these errors.
3
Steps to HP Printer Troubleshooting
Before we proceed with the troubleshooting steps
directly, there are some things you would need to
confirm. Check if the printer is able to make a
photocopy. If it does, there is some driver
issue. Also, check if any software or driver
update took place recently or is ongoing. Lastly,
confirm if the printer is able to print from
other devices on the same network. If yes, there
may also be some issue with the device that you
are using. Once you have found out the answers
to the above conditions, and have come to the
conclusion that your printer does not perform,
follow the steps
4

• Disconnect the power cable from the printer while
  it is in ON state. Also, disconnect other cables
  if any.
• Press and hold the printers power button for
  about 15 seconds.If you are connecting the
  printer to a surge protector or a voltage
  regulator, either set the voltage to default
  voltage rate in your region or disconnect it from
  the same and connect the printer directly to the
  wall outlet.
• Now, reconnect the power cable to the printer so
  it powers ON. If it does not power On by itself,
  follow the manual startup steps and process to
  turn it ON.
• Tip You can install HP Print and Scan Doctor
  software from the official HP website to resolve
  issues associated with the printer drivers.

5
The final word
Though there are some more steps to resolve the
issue of HP Printer in Error State, you can start
with identifying the HP Printer error codes and
then taking appropriate steps to alleviate them.
If you would need more information on the same,
you can always reach out to the official hp
printer support number. Furthermore, you can
reach out to our team comprising of hp printer
troubleshooters as well.