5 Tips to Maintain Helmet Hygiene

1
5 Tips to Maintain Helmet Hygiene 
2
(No Transcript)
3
Take the Helmet Apart Safely
Before cleaning, make sure to take apart all the
Child parts apart, such as the visors, the inner
lining and padding and the strapping mechanism
(only if it is removable). This will make it easy
for you to clean the helmet. If you do not know
whether the helmet can be taken apart, make sure
to check the manufacturers website to know more
about the model of your helmet. Be very gentle
while removing the parts. 
4
Soak the Helmet in Baby Shampoo 
Once all the ingredients but of the helmet has
been removed, so the inner lining and padding
separately in a warm soap solution, or you can
also use a little bit of baby shampoo. It is
highly recommended to use a dedicated helmet
cleaning solution which you can purchase at any
motorcycle accessories shop near you. In a
separate bucket, soak the outer shell of the
helmet any similarly prepared warm water
solution. Let both of this soak for about 15 to
20 minutes.
5
Wash Under Running Water 
Now, take the inner lining and padding out of the
soap solution and wash it under running tap
water. Using your hands, make a gentle rocking
motion to coax the dirt and grime from the inner
lining and padding, while continuing to wash it
under running water. This will take about 5
minutes. Repeat the process with the helmet
shell, and allow both of them to dry naturally in
air. Make sure not to place them under direct
harsh sunlight.  
6
Polish, Wax  Deodorize
Once the helmet shell has dried out completely,
use a little bit of Carnuba wax to polish the
outer surface very gently using a soft cotton
cloth to buff of the additional product. if you
do not have wax, you can also use a similar
chemical product which can be easily purchased
online or at any motorcycle accessories shop near
you. Finally, spray a little bit of helmet
deodorizer on the inner part of the helmet so
that it remains smelling fresh for a long period
of time. It is highly recommended to use the
helmet deodorizer whenever you get an
opportunity, ideally after every week. 
7
Reassemble the Helmet
Once all the polishing and buffing has been done,
reassemble the helmet making sure to put back the
parts in its original order. It might be helpful
for you to do that by snapping a photograph of
the helmet before taking it apart in the first
place. Do not tighten the screws very hard, but
make sure that they're not lose either! 
8
Contact us 

• Company Name - Studds Accessories Limited
• Website https//www.studds.com/
• Email info_at_studds.com
• Phone [phone]
• Address 23/7, Mathura Road, Ballabgarh,
  Faridabad, Haryana India, 121004.