WellMate WM-6, 20 Gallon, Fiberglass, Bladder Pressure Tank

1
WellMate WM-6, 20 Gallon, Fiberglass, Bladder
Pressure Tank
https//www.aquascience.net/
2
WellMate Pressure Tanks
WellMate's tanks feature corrosion-proof
composite construction that requires little or no
maintenance, plus their light weight makes them
easier and less costly to install. All materials
meet stringent U.S. Requirements for water
components and are NSF and/or FDA listed
materials. WellMate continues its tradition of
excellence by offering features and benefits
steel tanks cannot match. These rustproof
WellMate pressure tanks are made with
blow-molded, fiberglass wrapped, seamless
construction. They won't rust, dent, or come
apart at the seams because there are no seams,
and a rugged base is included. Full five-year
limited warranty with a one-year replacement
labor allowance. This tank now features the
quick connector that snaps securely into place
and is retained by an H-clip. See the photos
below. Note All tanks are pre-pressurized at 38
PSI, and should always be set 2 PSI below the
cut-in of your pressure switch. It is recommended
to check tank pressure before installation.
Pressure switch settings should not exceed a 20
PSI differential between cut in and cut out.
3
Fiberglass Tanks
4
Product Features
nner liner blow-molded polyethylene. Outer
shell Filament wound with fiberglass
tanks roving and epoxy resin. Bladder Heavy-gauge
polyurethane (Separates air and water). Bottom
inlet/outlet assembly high-impact PVC Air
connection Standard tire valve. Pre-charge 40
PSI Maximum operating pressure 125 PSI Maximum
temperature 120 degrees Fahrenheit Connection 1"
MNPT (Male pipe thread)  Quick Connect - see
photos below
5
Contact US
Aqua Science 301 Nooseneck Hill Rd Wyoming, RI
(Rhode Island) 02898 Store Hours (EST) 700am -
500pm (Monday Friday) 800am - 1200pm
Saturday Toll Free 800-767-8731 Local
401-539-0500 Fax [phone] Email
info_at_aquascience.net https//www.aquascience.net/