How I Do Setup My Arlo Wireless Camera System On Mac?

1
Arlo Camera Setup

• The Arlo camera setup is a wireless smart home
  security system, backed up with good battery
  life. Arlo cameras are easy to use and are
  installed within 10-15 minutes of your time. They
  can be used indoors as well as outdoors.

2
How To Sync And Setup Arlo Wireless Camera?
3

Step 1 - Unlock the battery compartment by
sliding and holding the latch.
4
Step 2 - Slide the battery door back and lift it
to open the compartment.
5
Step 3 - Insert the batteries as shown and close
the battery door.
6
Step 4 - Bring the camera within one to three
feet (30 to 100 centimeters) of the base station.
7
Step 5 - Sync the camera to the base station
Wait for the sync status LED to blink green.

• If you are using an Arlo base station, press the
  Sync button on the side or on the back of the
  base station for about two seconds and then
  release the button.
• If you are using an Arlo Pro base station, press
  the button on the top of the base station for
  about two seconds and then release the button.

8
Step 6 - Wait for the sync status LED to blink
green.
9

Step 7 - Press the Sync button on top of the
camera for about two seconds and then release the
button.
10
Step 8 - Check the camera LED on the base
station.
If the camera LED on the base station turns solid
green, the sync process is complete.
11
Step 9 - Repeat these steps for each camera.

• Note If you do not complete the sync process
  within 60 seconds, press the Sync button on the
  base station and try again.

12
Contact Us
Website - https//arlosetup-camera.com/
Phone Us - 1-888-630-4674