Common Issues That Commercial Refrigeration Canberra Could Face PowerPoint PPT Presentation

presentation player overlay
About This Presentation
Transcript and Presenter's Notes

Title: Common Issues That Commercial Refrigeration Canberra Could Face


1
Common Issues That Commercial Refrigeration
Canberra Could Face
2
  • A commercial refrigeration Canberra has several
    roles to play other than just providing adequate
    temperature and products that need refrigeration.
  • They also impact productivity levels, energy
    bills, and product safety.
  • But this appliance is also a machine after all
    that can face several issues and problems.

3
Common Commercial Refrigeration Problems Business
Professionals Should Be Aware Of
Ice Build-up inside the Refrigerator
  • Ice Build-up Often Occurs When Warm Air From
    Outside Enters A Refrigerator And Condenses On
    Interior Surfaces
  • Ice Or Frost Inside Refrigerated Compartments May
    Be Indicators Of Several Problems
  • These Problems Are Improper Air Ventilation,
    Faulty Door Gaskets, Refrigerant Leaks, Or Doors
    Being Opened Too Frequently Or Left Open For Too
    Long.

4
Failure to Maintain Temperature Levels
This Issue Can Arise Because Of Numerous Issues
Such As
  • Dirty Condenser And Evaporator Coils
  • A Malfunctioning Compressor Or Thermostat
  • Incorrect Temperature Settings
  • Dirty Fans
  • Inadequate Air Flow Inside The Refrigerator
  • Door Gaskets That Arent Sealing Properly
  • Refrigerant Leaks

5
Compressor Overheating
This can cause significant temperature
fluctuations inside a refrigerator and affect its
efficiency
Some Of The Potential Causes Of This Problem
Include
  • Dirty Condenser And/or Evaporator Coils
  • An Under-Charge Of Refrigerant Or An Incorrect
    Oil-Refrigerant Ratio That Can Lead To Increased
    Suction Temperatures
  • A Leak In The Discharge Or Relief Valve, Which
    Will Ultimately Result In Excessive Heat
    Generation

6
Ice Accumulation on Evaporator Coils
Some Factors That Could Cause Ice To Form On
Evaporator Coils Are
  • Excessively Low Temperature Settings
  • Dirty Fans And Filters, Followed By Inconsistent
    And Improper Airflow
  • Reduced Cooling Capacity Of The Coil, Which Can
    Be Due To Dirt And Debris Accumulation
  • Failure Of The Evaporator Fan Motor

7
Thanks!
  • Oldmate ACT Pty Ltd
  • https//www.oldmateact.com.au
  • E-Mail office_at_oldmateact.com.au
  • tim_at_oldmateact.com.au
  • Office 02 6254 6576
Write a Comment
User Comments (0)
About PowerShow.com