Structural Steel Supplier in Singapore Tips

1
Tips for Steel Fabrication Company Singapore on
Using FCAW GMAW
2

• Same for the laser cutting, metal rolling, and
  stamping machine operators and of course the
  welders.
• No matter how much they know, an operator will
  definitely appreciate some pro tips, especially
  if it will make things easier for him.
• Thats why Structural Steel Supplier in Singapore
  publish these tips on my blog post every once in
  a while

3

• And as I did a blog post comparing FCAW and GMAW
  the other day, Structural Steel Supplier
  Singapore thought why not wrap it up with some
  handy tips on FCAW and GMAW.
•  
• Clean the surface well
• Using a sperate circuit breaker
• Avoid gaps
• Dont bend the gun cable
• Tight contact tip
• Maintaining the correct electrode sickout
• Drive rolls
• Steady hands

4
Clean the surface well

• The first thing you need to remember before you
  begin the welding process is cleaning the surface
  thoroughly. It is applicable to all or any the
  various sorts of welding including FCAW and GMAW.
• Remember, if you are not doing it properly, you
  are just ruining your Steel Fabrication Company
  Singapore name and reputation to your clients,
  which is not good for your business.
• Only after cleaning or grinding the surface you
  ought to start attaching the work clamp for a
  solid work connection.

5
Using a sperate circuit breaker

• The temperature needed for steel fabrication,
  chrome steel fabrication, and aluminium
  fabrication, is different.
• But no matter what temperature you would like
  for the fabric, your machine must be connected
  with a separate breaker which is fused correctly.
  Otherwise, you wont be ready to produce the
  quantity of warmth to melt the fabric.

6
. Avoid gaps

• A good fit-up is crucial for satisfying your
  clients together with your work.
• For that, you would like to attenuate the
  burn-through which may be achieved by avoiding
  the gaps.

7
Dont bend the gun cable

• For smooth wire feeding, it's important that you
  simply keep the gun cable straight.
• Bending it may cause disruption in the workflow
  as the current of electricity will be affected by
  the harsh bend

8
Tight contact tip

• It is important that the contact tip is tightened
  within the place. A melted or elongated tip can
  ruin your workpiece completely.
• Maintaining the correct electrode sickout
• I have seen many welders, even the experienced
  ones to form this error. Steel Fabrication
  Company Singapore dont confirm if the right
  electrode sickout is maintained or not. As a
  result, accidents happen all the time.

9
Drive rolls

• The thing with drive rolls is that they need to
  be fed smoothly, with the right tension in fact.
  If not, the workpiece may not get ruined but your
  clients wont be calling you for his next
  project.
• 8. Steady hands
• Undoubtedly the hands that are holding the
  welding gun is the most important tool for
  precise results. If the hands are shaky,
  regardless of how good your equipment is, youll
  only get the worst. Thats why Steel Fabrication
  Services Singapore important that the operators
  hold the gun steady and operate confidently.
•