EdwinRobert (1)

1
BROTHER MFC-J497DW SETUP
Brother MFC-J497DW is a multifunctional printer
that supports wireless connectivity and so you
can quickly connect any wireless device to it.
This printer also supports mobile printing and
duplex printing. Go through the instructions
given on this page to know more about the Brother
MFC-J497DW setup.
2
BROTHER MFC-J497DW WIRELESS COLOR INKJET PRINTER
UNBOXING

• Unpack your printer and take out the printer
  supplies from the product box.
• Remove all the protective tapes from the printer
  and make sure to recycle them.
• Pull the paper input tray entirely out from the
  printer and open the output tray cover.
• Fan a stack of legal plain paper and load the
  paper stack into the tray.
• Close the output tray cover and refix the paper
  input tray into the printer.

3

• Make sure to pull out the paper support and
  extend the paper support flap.
• Connect your Brother MFC-J497DW printer to an
  electrical outlet using the supplied power cord
  and press the Power to turn on the printer.
• Navigate to the printer's LCD panel and follow
  the on-screen prompts to set your basic
  preferences.
• Lift/open the ink cartridge access door and
  remove the orange protective tape.
• Shake the black ink cartridge gently and unpack
  it. Insert the black ink cartridge into the
  printer after removing the protective tape from
  it.

4

• Install all the supplied ink cartridges into the
  printer after removing the protective tapes from
  them.
• If you wish to add the fax function, connect the
  supplied telephone line cord to your printer and
  configure the fax settings.

5

• Make sure to select the correct Receive mode and
  set your station ID.
• Next, insert the supplied CD-ROM into your
  computer's CD/DVD drive and run the setup file.
• After completing the driver installation, verify
  the printer functionality. For more info...

Follow our site for more info on installation and
simple troubleshooting steps.
https//how-to-install.co/brother-mfc-j497dw-setup