D-link DAP Dlink Extender extender

1
D-link DAP Dlink Extender extender
2

• To get an internet connection, we need a router
  and modem. To get the entire coverage of your
  home with wifi, you need an extender. Dlink
  introduces DAP Dlink Extender N300 extender to
  extend the wireless range of the existing router.
  It is compatible with almost all the routers and
  you can place it anywhere at your home.  A
  built-in setup wizard is there in this extender,
  so you can set it up in just few seconds.
  Download the application on your mobile device
  and enter the username and password. You will get
  the same at the product label of your extender.
  Enter the details and follow the instructions
  till the setup process finish.

3

• Connect your computer to the DAP-Dlink Extender
  take an Ethernet cable. Connect its one end to
  the extender Ethernet port and another into your
  computer. Plug your extender into an electrical
  outlet. 
• Configure the IP address we are here describing
  the configuration for Windows 7. At the taskbar,
  click on start and then go to control panel. Go
  to network and internet and then network
  connections. Change the adapter settings. You
  will see the LAN connection. Press right mouse
  button and select properties. Go to networking
  tab and click on TCP/IPv4. Enable the radio
  button representing use the following IP address.
  Enter the IP address (subnet mask) for your
  extender and save the settings by clicking on ok
  button.

4

• Connect an adapter to the computer connect an
  adapter to your computer and its another end
  into the power outlet. Turn on the adapter.
• Configure the IP address for your adapter in the
  same way as you have configured the IP address
  for your PC, you can configure the IP address for
  your adapter.
• In the taskbar, you will see an icon representing
  the network. Click on it and you will see a list
  of available networks. Select the wifi network of
  your Dlink DAP and enter the security key for the
  same. If you are setting up the extender then you
  will find the default password on the product
  label. Find the password and enter in the
  respective field while connecting to the extender.

5

• Connect to the user interface of the dlink dap
  Dlink Extender launch an internet browser such
  as Internet Explorer and in the address bar of
  this browser enter the default IP address of the
  extender.
• If the device is properly set up then you will
  see a login page otherwise, you will get the
  setup wizard instructions. At the login page,
  enter the username and password. In this case,
  the default values are printed on the guidelines
  manual. Enter the details in the respective
  fields and click on login button.
• Summary of all the details displayed on the basic
  home page. You can select language either Russian
  or English.

6
Contact Information

• www.Dlinkap-local.in