Mold Supplier at 3ERP

1
WELCOME TO 3ERP.COM
2
Injection Molding China
Numerous factors can affect the cost of your
material selection in injection molding China. Is
it important that the part needs to withstand
pressure, weight, temperature variations, or
elements or chemicals? High performing and
specialty resins arrive at a higher cost. The
maintenance cost of your mold can be increased by
certain characteristics of your resin.
3
Plastic Injection Mold
The plastic injection mold tooling evaluated and
the process extremes must be completely
investigated before its called into action. This
ensures repeatable and consistent production of
flawless molded parts. This is how tooling
weaknesses are corrected and traced.
4
Mold Making Supplies
Whatever the project, some challenges may be
faced by product designers, engineers, and
industrial designers while designing for
injection molding. The designers must avoid these
three mistakes for achieving efficient injection
molded parts from mold making supplies.
5
Plastic Mold Making
For a given thickness, stress concentration
varies with radius. Thus, the radii of sharp
corners need to be closely watched during the
plastic mold making. For R/T values, less than
0.5, the stress concentration factor is high but
the concentration lowers for R/T values over 0.5.
The internal radius must be a minimum of 1 time
the thickness and it is recommended.
6
3E Rapid Prototyping Limited Address No. 18-1
Gangkou Avenue, GangKou Town, ZhongShan,
GuangDong, 528447 China Phone [phone] Fax
8676088411110 Email info_at_3erp.com Website
https//www.3erp.com/