Yamaha Graphic Kit

1
Yamaha Graphic Kit
MX Graphic Kit Yamaha YZ250F
MX Graphic Kit Yamaha YZ450F
MX Graphic Kit Yamaha YZ125
from S229.90
from S229.90
from S229 90
MX Graphic Kit Yamaha YZ 250
MX Graphic Kit Yamaha YZ 85
MX Graphic Kit Yamaha PW 50
Iran S229 90
Irani SI 99.90
from SI 79.90
I9 IKE '
\
MX Graphic Kit Yamaha YZ 65
Supermoto Graphic Kit Yamaha WR 125 X
Enduro Graphic Kit Yamaha WR250F
from S189.90
from S249.90
from S229.90
Enduro Graphic Kit Yamaha Tenere 700
Enduro Graphic Kit Yamaha WR450F
MX Graphic Kit Yamaha YZ 125 - Racetech R
from S299.90
from S229.90
from S229 90
MX Graphic Kit Yamaha YZ 250 - Racetech _ from
S229.90
2
amaha Custom Graphic Kit
Do you want to apply Yamaha Graphic Kit like the
pros? Then you are exactly right here. We show
you how to do it! We have summarized the steps
for you here again 1. Degreasing
Degreasing is one of the most important steps
when sticking on your new graphic kit. Only
if the surface of your plastics is 100 fat-free
can the stickers stick well to your plastics.
We use conventional brake cleaner for sticking
and rub the Plastics until they become a little
matt, then the stickers adhere perfectly to the
surface. 2. Applying The Graphics The
easiest way to do it is to attach your plastics
on your bike, then you have to. Do not hold
plastic parts and can concentrate entirely on the
positioning of your graphic. When fitting,
we recommend orienting yourself to the screw
holes and closing them properly position, then
the rest should fit by itself. If the part
to be glued has no screw holes, then you can, as
shown in our graphic above. Cut the carrier
film and gradually remove it after positioning.
After positioning, it is important that the
stickers are firmly pressed on. The harder
you press them, the better they hold. To
make it even easier for you, there is a backyard
design squeegee with every complete decor. 3.
Warm Up Attention Your decor will only
hold well if you use a hot air dryer to stick it
on. Our film has a "memory effect" - only
when you can heat it to at least 150 C they
adapt optimally to the round shapes of the
plastic parts. This temperature cannot be
reached with a normal hair dryer, we recommend
the use of a hot air gun. You therefore have
to decorate your decor again with one in all
places. Heat the hot-air dryer and press it
down particularly on the round parts of the
plastic parts. Then you can be sure that the
graphic no longer opens. Our new Graphics
Configurator gives you a one of a kind experience
when creating your new MX Graphics Kit!
3
BACKYARD DESIGN USA
L
230 N 4th St. Gadsen, AL 35901 United
States info_at_backvarddesianusa.com Mo. - Fr.
830am - 4pm https//backvarddesianusa.com/produkt
-kateaorie/full-araphic-kits/vamaha-full-araphic-k
its/
https//www.facebook. com/bckyrddsgn
https//twitter.com/backyardesign
https//www.instaaram.com/backvarddesian
https//www.voutube.com/channel/UCdEWid8rOT6-7GbNS
RItr8a