smiths299 (15)

1
Canon Pixma mg2950 Wifi Setup
https//www.canonprintersupport247.com/blog/how-to
-setup-canon-pixma-mg2950-wireless-connection/
2
How To Connect Canon Pixma mg2950 Wifi Setup?
There are certain protocols in a Canon Pixma
mg2950 Wifi Setup. This is not a plug and print
arrangement. This is endemic not only for Canon
printers but also for wireless printers, and a
set of directions must be followed. It is a must
to follow the directions properly as any delay in
the sequence results in a failure automatically
and the printer will not reply to the commands.
Like any printer, Canon has some access points
(also called hubs or routers) with a WPS (WiFi
Protected Setup) or an automatic connection
button. This portal provides a connection to a
network without a password, for example by
a PIXMA MG3540 printer. Steps for Canon Pixma
mg2950 Wifi Setup   The easiest way to connect is
with the WPS button, but if you have not, you can
still use some alternative means to connect to
it. Detailed instructions are
3
1. Use the CD which came with the printer and
start the configuration for Windows users.
Download the manuals and software for MAC users
by selecting Product selection from
the PIXMA range page. 2. A first screen is
supposed to appear and then click next and type
the password to install the helper
tool. 3. Once you are ready, click
between USB and WLAN. If the printer is not
powered on, the sequence will not work. 4. The
printer is ready now and the next step is the
network connection. As the cableless setup
appears, hold down the Wi-Fi button for the
printer and then release the orange alarm lamp
two times. 5. The blue (WiFi) lamp should flash
at this stage quickly and the green power lamp
should be lit. Be aware that during configuration
the network connection is temporarily disabled.
6. Click on the screen to display the Canon
Products licensing agreement and the Allow all
wizard installation processes option.
4
7.The printer model and the wireless name (SSID)
will be displayed. And the connection setup
finally comes to an end. Run a print test. The
setup of Canons wireless printers was programmed
to be user friendly and easy to handle, otherwise
nobody would dare follow the wireless print
instructions and have it pre-installed instead.
As with all installation instructions, the
sequence requires common sense. Canon Pixma
mg2950 Wifi Setup Please check that you comply
with the following two conditions before
attempting to link your PIXMA printer to your
wireless network (that is, you have an access
point (sometimes a router or hub), which allows
you to connect to the Internet. Before you take
the next step, your access point must operate
fully. 1. Make sure your computer is connected
to the Internet from here on such as a PC, Mac,
tablet or smartphone, which is known as a
computer. 2.Try browsing an internet site from
the computer such as to confirm if the computer
you want to use is connected to the network.
Should it not appear on the web page, it is
necessary to fix this before proceeding and not
successfully connecting to the internet.
5
(No Transcript)