What Is Wall Putty and How Should You Use It

1
What Is Wall Putty How Should You Use It?

• www.jkcementuae.com

2
INTRODUCTION

• Do you want to paint your house but have found
  some trouble spots on the walls? Not to worry,
  wall putty excels in this application. Adding
  wall putty to the walls prior to painting
  guarantees a clean and even finish!
• There are many applications for wall putty, the
  most popular of which is to apply it before the
  final coat of paint to extend the longevity of
  the paint. The best thing regarding wall putty is
  that it could be utilized on both dry and wet
  walls, and also on both inside and outside of the
  wall finishing. Nevertheless, in order to achieve
  excellent outcomes, it is important to first
  understand the method of putty application.

3
Points to remember

• It is important to note that the wall putty can
  only be added to the walls after the initial
  primer coat has dried. It covers the surface
  imperfections and even the smallest holes. It
  acts as a protective sub-layer for the paint. One
  or two coats of putty may be added if needed, but
  the previous coat must dry before applying the
  second. The desired outcome will only be obtained
  if the procedure is implemented correctly.
• To prevent inhaling excessive dust and gravel, a
  surface foundation experiment must be performed
  while wearing protective goggles as well as a
  mask. A putty knife, paint sharpener, sanding
  block, sandpaper, a bit of fabric, a strong
  brush, and also some water are the necessary
  tools for the putty application.

4
Points to remember

• Utilising a putty knife, paint scraper, or
  sandpaper, you could even remove excess flakes or
  particulates from the walls and clean the entire
  surface of dust, dirt, and oil. It is suggested
  that you scratch off the limewash coating on your
  walls with a paint scraper or sandpaper. You will
  strip the sheen from oil-based paint-based walls
  by sanding them as well.
• It is essential that you use a screwdriver to
  extract all of the loose material and dig out all
  of the holes. After that, just cover them with a
  putty mixture or plaster. When it has dried,
  smooth the surface with sandpaper.
• We hope you liked reading about how to use wall
  putty and how it can support your apartment's
  walls. If youre looking to purchase high-quality
  putty paint, consider visiting JK Cement for
  cement-based putty today. 

5
THANK YOU

• www.jkcementuae.com