A Guide to Selecting The Right Automatic Transfer Switch

1
A Guide to Selecting The Right Automatic Transfer
Switch
https//www.netrackindia.com/
2
Automatic Transfer Switch

• Automatic Transfer Switch helps transfer the load
  from utility power to backup or secondary power
  source when the power is gone. Multiple factors
  and requirements determine various types
  of Automatic Transfer Switch available.
• There are several types of modes in which these
  ATS work-
• Open-transition transfer devices- These switches
  work by opening the connected source before
  connecting to the new one.  
• Fast-closed-transition transfer- These switches
  work parallelly one source is disconnected when
  the two are working.
• Soft closed transition- they synchronize the
  sources while they transfer the live sources and
  connect them with the help of a ramp load impulse
  to the backup power source.
• Sub-cycle transfer- the transfer of power from
  one source to another often happens within a
  minimal time difference, causing a slight
  interruption.

https//www.netrackindia.com/
3
Automatic Transfer Switch

• There are the following types of switches to
  choose from-
• Standard switches they are ATS installed with
  their sub-panel. People dont prefer using these
  switches now as they are completely outdated now.
• Load Centers the ATS and sub-panel are in the
  same circuit. These switches are meant for small
  houses whose voltage usage is not that high.
• Service Disconnect these switches are suited for
  large generators. They are the most costly among
  the three but most effective and capable.
• With all these points in your head, you can
  easily choose Automatic Transfer Switch to choose
  among the many choices you have. It is always
  better to take advice from an expert. NetRack is
  an automatic transfer switch manufacturer and one
  destination for your IT enclosures and related
  queries.

https//www.netrackindia.com/