Simple Steps to Install the Air Conditioning System

1
8 Simple Steps to Install the Air Conditioning
System

• Adelaide Heating and Cooling

2

• Installing a split air conditioning system is not
  an easy task. You need a professional company
  that is into services related to airconditioning
  Adelaide to come and assist you with this task.
• If you, however, feel that you can do it without
  the assistance of a professional air conditioning
  Adelaide company, you should proceed to do it if
  you have good knowledge in air conditioning
  systems. 
• There are eight steps that you need to follow
  when installing a split air conditioner. 

3
Right Area to Fix the Indoor Unit

• Yes, you must check the area where you are going
  to install the indoor unit first before fixing
  it. You need to pick an area that is right for
  the air to flow freely in that space. 
• You must place the air conditioner on a wall that
  is strong and sturdy. Never put it on a wall that
  is weak as the equipment might cause vibration. 

4
Mounting Plate and Outlet Hole

• Once you have selected the area where you are
  going to install the indoor unit, the next thing
  that you need to do is to fix the mounting plate.
  Now, this is the place where the indoor unit is
  going to sit upon on the wall. 
• After which you need to drill the marked areas,
  and you should plan on installing the plastic
  anchors. Tight the screws on the mounting plate
  and at last, drill a hole of upto 7 to 8 cms.
  Pipes and wires from the indoor unit to go to the
  outdoor unit through this hole. 

5
Place the Indoor Unit

• After completing the second step, you should
  place the indoor unit on the mounting plate.
  Ensure that you connect copper plates, drainage
  pipe, and the wires correctly to the system.
  Ensure that if there are any bends on the copper
  pipe, it is smooth. Place the front cover of the
  indoor unit on top of it. 

6
Right Spot for Outdoor Unit

• The next thing that you should plan on doing
  is to pick a place wherein you want to place the
  outdoor unit. It should be almost 30-35
  centimeters away from the indoor unit. Avoid
  placing it under the sunlight or in a place where
  it does not get dust. 

7
Brackets for the Outdoor Unit

• The next thing that you should plan on doing
  is to install the brackets for the outdoor unit.
  You should do it by drilling the holes for the
  brackets in the wall. 

8
Fix the Outdoor Unit

• After tightening the outdoor unit, you
  should place the outdoor unit on the brackets.
  Ensure that it is sitting comfortably on it.

9
Connect the Wires

• After placing the outdoor unit on the
  brackets, the next thing that you do is connect
  the wires to it as per the manufacturers
  instructions. 

10
Connect the Copper Pipes

• Lastly, you should connect the copper pipes to
  the outdoor unit after cleaning the copper pipes
  with a vacuum pump. 
• If you are confused about any of the steps
  mentioned above, you should use the best company
  that does the installation of the air
  conditioning Adelaide.Using a professional firm
  that is into airconditioning Adelaide is the best
  thing to do if you want the air conditioning
  system to work efficiently.

11
Contact
Visit Our Website- https//www.airconditioningade
laidehc.com.au/
Phone - [phone]
Address-   208a Park Terrace, Adelaide, SA-5108
Australia