Artoverstock|Dive Cylinder - PowerPoint PPT Presentation

About This Presentation
Title:

Artoverstock|Dive Cylinder

Description:

Our dive cylinders are heavy and cumbersome to carry, but the air capacity and buoyancy characteristics are very desirable for the serious diver. Being able to easily transport these cylinders is a plus. – PowerPoint PPT presentation

Number of Views:40
Slides: 6
Provided by: Ozzynautilus
Category: Other

less

Transcript and Presenter's Notes

Title: Artoverstock|Dive Cylinder


1
Dive Cylinder 
2
About Us
  • Our dive cylinders are heavy and cumbersome to
    carry, but the air capacity and buoyancy
    characteristics are very desirable for the
    serious diver. Being able to easily transport
    these cylinders is a plus. A diving cylinder or
    diving gas cylinder is a gas cylinder used to
    store and transport high pressure gas used in
    diving operations. Cylinders used for scuba
    typically have an internal volume (known as water
    capacity) of between 3 and 18 litres (0.11 and
    0.64 cu ft) and a maximum working pressure rating
    from 184 to 300 bars (2,670 to 4,350 psi).

3
Service
  • A diving cylinder or diving gas cylinder is a gas
    cylinder used to store and transport high
    pressure gas used in diving operations. This may
    be breathing gas used with a scuba set, in which
    case the cylinder may also be referred to as
    a scuba cylinder, scuba tank or diving
    tank. Diving cylinders are usually manufactured
    from aluminium or steel alloys, and when used on
    a scuba set are normally fitted with one of two
    common types of cylinder valve for filling and
    connection to the regulator. 

4
Features
  • The pressure vessel is a seamless cylinder
    normally made of cold-extruded aluminium or
    forged steel.4 Filament wound composite
    cylinders are used in fire fighting breathing
    apparatus and oxygen first aid equipment because
    of their low weight, but are rarely used for
    diving, due to their high positive buoyancy. Alumi
    nium cylinders are usually manufactured by
    cold extrusion of aluminium billets in a process
    which first presses the walls and base, then
    trims the top edge of the cylinder walls,
    followed by press forming the shoulder and neck.
    The final structural process is machining the
    neck outer surface, boring and cutting the neck
    threads and O-ring groove.

5
Contact Us
  • URL- https// ozzynautilus.com/
  • Address- Cyprus
  • Country in the Middle East
  •  
  • Contact Details- 357 22 315545
  • Email info_at_ozzynautilus.com
  • THANK YOU
  •  
  •  
  •  
  •  
Write a Comment
User Comments (0)
About PowerShow.com