Some Tips to Do Before You Are Doing the Repairs

1
Some Tips to Do Before You Are Doing the Repairs

• www.semi-probes.com

2

• When making a new circuit boards design, probes
  is one of the most important components.
• They are the part that actually carries the
  electricity from the source to the board.
• If you are short in this area, you will be
  compromising the entire purpose of your circuit
  board.

3

• You should not compromise the quality of your
  probes.
• The best way to make sure that you get the best
  quality is to use only the best quality probes.
• Most people think that probes are easy to use.
• They can either use a regular mechanical pencil
  or a liquid crystal on the other.

4

• There are two advantages of using the electrical
  probes and these are discussed below.
• The first advantage is that it gives you more
  options in the design of the board.
• You can play around with different types of
  designs depending on what you want.

5

• It gives you the freedom to choose the thickness
  of the board.
• This will also give you the freedom to create a
  Probe Card Design that will meet your exact
  specifications.
• A second advantage of using the electrical probes
  is that it makes it easier for you to test the
  wire.

6

• Before the invention of the probes, testing the
  wire was very tedious and time consuming.
• You had to make several connections to check
  whether one of them is working or not.
• Now, all you have to do is make a simple test and
  then compare the results.

7

• All you have to do is to make multiple
  connections and then check for the results.
• A third advantage is that it helps you make the
  most of your money.
• When you design a new circuit board, you will
  realize that making many connections is not
  always required.

8

• In this case, you will be able to make a few
  extra probes and then you will be able to make a
  decision regarding the thickness of the board.
• As you can see, the probes are really helpful for
  the engineers to decide about the thickness of
  the wire.
• On the other hand, you will not need to make the
  additional investment if you use the right type
  of probes.

9

• This means that you will get the best value for
  your money. You will also need to pay attention
  to the power ratings of the probes that you are
  going to use.
• If you choose to use the highest power rating,
  you will be able to trace long and thick wires
  without experiencing any problems.
• Using the right type of probes will also help you
  make the best circuit design.

10

• In most cases, it has been found that the probes
  which are the thinner are more effective than the
  thicker ones.
• If you want to use the thicker rods, you will
  need to use the extra wire that you have
  purchased.
• This will help you to make a circuit which is
  stronger.

11

• You will find that the probes come in different
  types.
• For example, you will need to use the glass or
  water probes for the best results.
• You will also find that there are various colors
  as well.
• You will need to determine what color suits your
  requirements.

12

• Most of the time, the black colored wires are
  used to help create the best wire designs.
• It is important that you know how to use the
  electrical connectors so that you will be able to
  make the best possible connections.
• There are some tips that you can follow to help
  you connect the probes.

13

• First of all, you should always choose the wire
  that is thickest.
• When the probes are of thin material, they will
  become more prone to getting stuck.
• When this happens, you will not be able to
  complete the repair properly.
• Secondly, you should always try to remove the
  wire from its terminal connection first.

14

• This will help you to prevent the risk of
  short-circuit and fire accident.
• You should also pay attention to the way that the
  wire is being provided.
• You should ensure that the wire is not damaged
  when you are carrying it to the location that you
  are going to Probe Card Manufacturing.

15

• Finally, it will be better for you if you do not
  use any flux.
• Flux will help you weaken the connection. This
  will make it hard for you to fix the probes
  easily.
• Instead, you can use some pliers instead of flux.
  You should wrap the wire with pliers to avoid any
  hassle.

16
Thank you