What Are Carbon Steel Pipes and plates

1
What Are Carbon Steel Pipes and plates

• Low-alloy structural steel, such as 16Mn, 5MnV,
  such as 10, 20, 30, 35, 45, etc., or alloy steel,
  such as 40Cr, 30CrMnSi, 45Mn2, 40MnB, etc., are
  used to make general carbon steel pipe. Fluid
  conveyance pipes are generally formed of seamless
  pipes made of low carbon steel, such as 10 and
  20.
• For more information visit https//www.ganpatind.
  com/astm-a106-gr-b-carbon-steel-pipe-supplier-expo
  rter/

2
ASTM A106 GR. B Carbon Steel Pipes

• To Re-establish the ferriteaustenite balance,
  all forged ASTM A106 GR. B Carbon Steel Pipes
  should be solution annealed according to the heat
  treatment section. The HAZ can increase its
  ferrite content when the weld metal temperature
  of ASTM A106 GR. B Carbon Steel EFW Pipes is
  between 2100 and 2640 degrees Fahrenheit (1150
  and 1450 degrees Celsius).

3
ASTM A106 Grade B Chemical Composition 
Grade A Grade B Grade C
Carbon max. 0.25 0.30 0.35
Manganese 0.27 to 0.93 0.29 to 1.06 0.29 to 1.06
Phosphorus, max. 0.025 0.025 0.025
Sulfur, max. 0.025 0.025 0.025
Silicon, min. 0.10 0.10 0.10
4
ASTM A333 GR. 6 Carbon Steel Pipes

• To manufacture ASTM A333 GR. 6 Carbon Steel EFW,
  no hydrogen should be supplied to the shielding
  gas under any circumstances. Cold cracking in the
  welded zone is avoided with pipes. To prevent
  nitrogen loss in the welded zone, N2 gas can be
  added to A333 GR. 6 Carbon Steel pipes.
  Intermetallic phases can affect the mechanical
  qualities of A333 GR. 6 pipes at temperatures
  1110 Degree F and 1830 Degree.

5
ASTM A333 Gr.6 Carbon Steel Pipes Specifications
Specifications ASTM A333 ASME SA333
Dimensions ASTM, ASME and API
Size 1/2 NB to 36 NB
Thickness 3-12mm
Schedules SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
Type Seamless / ERW / Welded / Fabricated
Form Round, Hydraulic Etc
Length Min 3 Meters, Max18 Meters, or according to customers requirement
End Plain End, Beveled End, Treaded
6
ASTM A515 Gr 60 Plates

• Lock wire, exhaust liners, and turbine seals are
  among of the uses for ASTM A515 Gr. 60 CS Sheets
  Plates. The nickel refractory metal is employed
  in the higher temperature of the heat utilised
  sections in iron base high-temperature alloys
  such as ASTM A515 Gr. 60 Carbon Steel Plates,
  which are typically only used up to 750 Degree D
  780 Degree C.

7
A515 Grade 60 Carbon Steel Plate Thickness Chart
Thickness in Inches Width Length Lbs/Sft
3/16 48, 60, 72, 84, 96 96, 120, 124,133, 144, 156, 240 7.660
1/4 48, 60, 72, 84, 96 96,110, 120, 144, 240 10.210
5/16 48, 60, 72, 96 96, 120, 240 12.760
3/8 48, 60, 72, 84, 96 96, 120, 144, 169, 240, 260 15.320
7/16 96 240 17.870
1/2 48, 60, 72, 84, 96 96, 120, 144, 240 20.420
8
ASTM A515 Gr 70 Plates

• Because of the possibility of uniform and
  localised corrosion, ASTM A515 Gr. 70 Carbon
  Steel Slitting Plates should only be used in
  hydrochloric acid. In dilute hydrochloric acid,
  highalloyed steels like ASME SA 515 Gr. 70
  Carbon Steel Perforated Plates can be utilised
  because there is no one measure of corrosion
  resistance. The best steels to use for this
  purpose are the high nickel austenitic steels
  such as ASTM A515 Gr. 70 CS Plates.

9
ASTM A515 Grade 70 Plate Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

10
About Us

• Ganpat Industrial Corporation is a prominent
  manufacturer, dealer, and supplier of stainless
  steel, high nickel steel, alloy steel, carbon
  steel, and other metals in the forms of pipe,
  fittings, flanges, fasteners, plate, round bar,
  wire, coils, and other products. GIC's corporate
  office is in Mumbai, and the company is dedicated
  to providing high quality and serviceability to
  all of its clients in the shortest possible
  period.
• For more information please visit
  https//www.ganpatind.com/

11
Thank you