What is sheet metal?

1
What is sheet metal?

• to characterize the term in a straightforward
  manner, it is fundamentally a sort of metal,
  which goes through an assembling cycle for
  pressure into level sheets. Via tasks including
  arresting, cutting, shearing, punching, and
  collapsing, they are prepared through cool
  metals.
• For the most part, each sheet accompanies
  outstanding quality and a thickness under 6 mm,
  offering flexibility in a wide scope of uses.
  Consequently, it fills in as a fundamental device
  or gear for each metal laborer.
• For more information visit https//www.sangeetame
  tal.com/stainless-steel-plate-sheet-coil-supplier-
  exporter.html

2
Stainless Steel Plate, Sheet, Coil

• 347 Stainless Steel Plate opposes polythionic
  corrosive pressure erosion breaking in
  hydrocarbon administration. It can likewise be
  used in chloride or without fluoride acidic
  arrangements at moderate temperatures. SS 316
  Coils are frequently used in measure streams
  containing chlorides or halides as it gives
  higher wet blanket, stress-to-break and rigidity
  at raised temperatures.
• Tempered Steel 904L Sheets show astounding
  protection from chloride stress erosion breaking,
  pitting and general consumption obstruction, and
  can withstand weaken sulfuric corrosive
  conditions. It additionally offers amazing
  protection from other inorganic acids like hot
  phosphoric corrosive and most natural acids.

3
Incoloy Alloy 800/800H/800HT Sheets, Plates
Coils

• Composite 800 Sheets (UNS N08800 Sheets) is a
  broadly utilized development material for
  hardware that should have high strength and
  oppose carburization, oxidation and other hurtful
  impacts of high-temperature openness.

Mechanical Properties
Grade Density Melting Point Tensile Strength Yield Strength (0.2Offset) Elongation
Incoloy 800 7.94 g/cm3 1350-1400 ? 500 205 30 - 35
Incoloy 800H 7.94 g/cm3 1350-1400? 500 200 30 - 35
Incoloy 800HT 7.94 g/cm3 1350-1400? 500 200 30 - 35
4
Inconel Alloy 601 Sheets, Plates Coils

• Like Alloy 600 Sheets, Alloy 601 Sheets
  additionally offer protection from different
  types of high-temperature consumption and
  oxidation. In any case, dissimilar to 600, this
  nickel-chromium amalgam of UNS N06601 Plates has
  an aggregation of aluminum.

Chemical Properties
Grade Ni Fe C Mn Si Cu Cr S Al
Inconel 601 61.5 min 14 0.05 max 1.0 max 0.50 max 1.0 max 21.0 - 25.0 0.015 max 1.0 1.7
Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2Offset) Elongation
8.1g/cm3 1320-1370? 650 min. 300 min. 30
5
Nickel Alloy UNS 2200 Sheets, Plates and Coils

• Composite 200 Sheets are reinforced with created
  materials. With UNS N02200 Plates, the
  limitations of these composites are consolidated
  into a solitary, double science which brings
  about a solitary amalgam with the best attributes
  of both.

Chemical Properties
Grade Ni Fe C Mn Si Cu Mg Ti S
Nickel Alloy 200 99.0 min 0.4 max 0.15 max 0.035 max. 0.01 max. 0.25 max - - 0.01 max
Mechanical Physical Properties
Density Melting Point Tensile Strength Yield Strength (0.2Offset) Elongation
8.9 g/cm3 1446 C (2635 F) Psi 67000 , MPa 462 Psi 21500 , MPa 148 45
6
Hastelloy C22 Sheets, Plates Coils

• UNS N06022 Plates is utilized in contamination
  control, substance handling, mash and paper
  creation, squander treatment, marine seawater
  applications, and so forth When looking at the
  two compounds, there is little distinction in
  consumption safe execution with one special case
  Alloy C22 Sheets shows an improvement over Alloy
  C276 Sheets when utilized in specific immersed
  wet chlorine conditions.

Chemical Properties
Grade C Si Mn P S Cr Mo Ni N
C22 0.010 0.08 0.50 0.02 0.02 20 - 22.5 12.5 - 14.5 Bal Bal

Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2Offset) Elongation
8.89 g/cm3 1370 C (2550 F) Psi 1,15,000 , MPa 790 Psi 52,000 , MPa 355 40
7
Inconel Alloy 718 Sheets, Plates Coils

• Compound 718 Sheets are made up basically of
  nickel (52). These UNS N07718 Plates highlight a
  dissolving point of 2300 degrees Celsius and have
  amazing rigidity that loans itself well to the
  wide assortment of modern applications it is
  associated with, for example, latches and
  high-strength bolts and atomic fuel component
  spacers, to give some examples.

Chemical Properties
Inconel Ni Cr Fe Mo Nb Co C Mn Si S Cu Al Ti
718 Min. 50 17 Balance 2.8 4.75 -  -  -  - -  -  0.2 0.7
718 Max. 55 21 Balance 3.3 5.5 1 0.08 0.35 0.35 0.01 0.3 0.8 1.15
Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2Offset) Elongation
8.2 g/cm3 1350 C (2460 F) Psi 1,35,000 , MPa 930 Psi 75,000 , MPa 482 45
8
About us

• The Sangeeta metals are worked by the gathering
  of specialists in material science and designing.
  They are specialists in acquiring elite machine
  gear. Ordinarily, they are continually attempting
  to address the inquiries for the clients who are
  looking for cutting edge highlights in erosion
  obstruction, delicacy of weight, temperature
  solidness, high strength, and high
  immaculateness. The firm is only occupied with
  assembling a wide scope of channeling hardware
  according to ASTM/ASME/DIN particulars and set
  modern standards. Our proverb has skill in
  assembling of modern instruments.
• Every single fabricated item goes through the
  hand of experienced staff before dispatch. With
  cutting edge innovative work segment, we offer
  new plans and items to meet the assumptions for
  regarded clients. Furthermore, deal to modify the
  item for enhanced modern applications from one
  side of the planet to the other. We generally
  welcome new clients to develop our family,
  additionally shares relative data to clients to
  pick the right item.
• For more information visit https//www.sangeetame
  tal.com/

9
Thank you