Why Need To Calibrate Survey Equipment?

1
Why Need To Calibrate Survey Equipment?
2

• The most important reasons for calibrating an
  instrument are to guarantee that it is reliable
  and that it can be relied upon. Measurement of
  the instruments accuracy and consistency of
  results with other measures were performed. So,
  lets have a look at the need for calibrating the
  survey equipment.

3
Cost reductions

• When you consider the costs associated with any
  legal action for damages that may be brought
  against you, the fees associated with correct
  calibration and adjustment are insignificant in
  contrast. Consequently, companies that take their
  responsibilities seriously and seek to develop
  long-term business connections must calibrate
  their equipment on a regular basis to ensure that
  it is operating properly. It may also invalidate
  your warranty if your equipment has not been
  calibrated properly.

4
There is no quality assurance if there is no
quantitative data.

• It is likely that accurate measurement will be
  the most efficient method of avoiding expensive
  repairs or even insurance claims for damages.
  Specifically, this is true in the context of
  international quality management standards (such
  as ISO 9000 and HACCP), as well as in the context
  of product liability claims based on state and
  federal product liability laws.

5
Calibration and adjustment are necessary

• A measurement error is a discrepancy between the
  measured value of a quantity and the real value
  of the item being measured. The longer a device
  has been in operation, the more likely it is to
  have such mistakes. At some point, the variations
  may become so significant that they no longer
  fall within acceptable tolerances, indicating
  that quality is no longer guaranteed, as
  previously stated.

6

• The measurement inaccuracy of the instrument may
  be measured and recorded by calibrating the
  device. If the measurements go outside of the
  permitted range, the instrument must be
  calibrated to compensate. During this procedure,
  the measuring instrument is reconfigured in such
  a way that measurement errors are kept to a
  minimum and deviations from the setpoint value
  are kept within the parameters of the device.

7

• Under static operating circumstances, a single
  point survey equipment calibration service is
  adequate for quality assurance purposes. Crushing
  and reconditioning systems for compressed air are
  often operated under continuously changing,
  dynamic ambient and operational circumstances,
  resulting in fluctuations in the quality of
  compressed air quality within the measurement
  range and within the system-defined limits (such
  as those of the compressed air quality classes
  according to ISO 8573.1).

8
For More Information

• https//medium.com/_at_falcongeosystem/why-need-to-ca
  librate-survey-equipment-4b5b7ff3ccbe

9

• In the long run, the precision of all measurement
  instruments decreases. This is most often caused
  by natural wear and tear on the vehicle. In some
  instances, the degradation of an instrument might
  take place extremely fast, while in others, it
  can take place over an extended period.

• The basic conclusion is that calibrating a piece
  of measuring equipment increases the accuracy of
  the instrument. Product quality is improved by
  the use of accurate measurement instruments by
  calibration companies in the UAE. You can also
  contact Falcon Geomatics for the best services.

10
Contact Details
Address
Ahammed Kamal Warehouse 6, Street 10C, Ras al
Khor Industrial 1, PO.Box.238544 Dubai, United
Arab Emirates
Phone
Link
971 4 327 9333 971 4 2299555
sales_at_falcon-geosystems.com service_at_falcon-geosyst
ems.com
11
Thank
You