How to Level a Subfloor on a Wood Floor?

1
How to Level a Subfloor on a Wood Floor?
2
Make the Floor Shiny and lose fasteners should be
tightened.
Remove everything off the floor. Sweep it with a
broom or vacuum it with a shop vacuum. Look for
any nails or screws that are loose on the floor.
Any loose fasteners should be nailed or screwed
in place, with the nail and screw heads slightly
below the subfloor's surface. To fasten loose or
squeaking pieces of wood subfloor material, use
deck screws or ring-shank nails inserted into the
floor joists.
3
Identify any high and low points.
On the floor, place a long straight edge tool or
a straight piece of 2-by-4-inch lumber. Home
Depot recommends moving it back and forth across
the entire floor, noting high and low points.
Make a note of each location and if it is high or
low.
4
High-traffic areas should be sanded
Wear a dust mask. Using medium-grit sandpaper,
sand off any high places. If you only need to
sand a small area, use a hand or belt sander.
Consider renting a flooring edger if you have a
lot of locations to lower. It will cover more
ground in less time. To reduce dust, rent a
machine with a dust-collecting bag. While
sanding, keep an eye out for nail and screw
heads. Remove the item if necessary.
5
Fill in the Gaps
Experts of floor leveling Sherman oaks recommend
filling low spots with premixed cementitious
leveling compound applied with a trowel. To blend
in with the wood subfloor, feather the outer
borders. When it comes to drying time, stick to
the manufacturer's instructions. Allow the
compound to dry overnight for the best results.
To finish leveling the dry leveling compound,
sand the rough edges with medium-grit paper. Dust
from the sanding operation should be vacuumed.
6
What You Will Require
Professional assistance from floor leveling
Sherman oaks, vacuum in the store, Broom, Hammer,
Screwdriver, Deck screws are a type of screw that
is used, Nails with ring-shanks, Tool for
straightening, A 2-by-4-inch piece of lumber that
is straight, Mask to protect against dust,
Sandpaper with medium grit, Flooring edger, hand
sander, or belt sanded compound for smoothing
cementitious surfaces, Trowel.
7
Thank You
For more details visit https//almahdihardwoodflo
oring.com/service/floor-leveling-sherman-oaks/