ap setup| AP SETUP| Ap Extender Setup

1
AP SETUP

• Ap.setup can be viewed via a web browser such as
  Google Chrome, Edge, or Firefox on any device. To
  connect with http//ap.setup without any
  problems, make sure your device is connected to a
  repeater.

2
How to Setup New Extender Via AP.Setup

• Ap.setup is an offline webpage that can only be
  visited while your wavlink extender is wirelessly
  or wiredly connected to the device. The user can
  also use the WPS method to configure the new AP
  extender.

3
SITES-

• https//apsetuplogin.com/

4
IMAGES- AP SETUP
5
Extender Mode -ACCESS POINT MODE

• The range of existing wireless signals is
  expanded in extender mode without the usage of
  any connected setup. If your router has a WPS
  button, you can connect it to the New Extender
  Setup by pressing the WPS button on the router
  and the Extender at the same time. If you want to
  do it in the browser, go to apsetup admin and
  begin the configuration. If ap.setup does not
  function, we recommend that you first reset the
  extender before proceeding with the setup.

• The extender is connected to the router through a
  wired connection in access point mode. Also, for
  this setup, make sure the repeaters switch is
  set to AP mode before beginning the setting.
• Once the extenders LAN is linked to the routers
  LAN, go to https//ap.setup admin to begin the
  setup. Select Access Point as your mode on the
  apsetup wizard page.

6
AP-MODEREPEATER MODEPOUTER MODE
7
THANKYOU FOR WATHING-