What Is Metal Fabrication And Its Usage?

1
A1Co Engineering

• PROFESSIONAL METAL FABRICATION SERVICES

Website Contact Us - 088447 4144
2
What Is Metal Fabrication And Its Usage?

• Metal fabrication is an important and useful
  step of the manufacturing process. It is used to
  manufacture a wide range of products from
  paperclip to plane parts, and from hardware and
  tools to pipes and car parts, metal fabrication
  Adelaide can create wonders.
• You should remember that it is not limited to
  welding only but there are various aspects of it.
  A number of techniques are used for giving shape
  to metal so that parts and products can be made.
  All of them fall into the category of
  fabrication.

3

• A number of techniques are used for giving shape
  to metal so that parts and products can be made.
  All of them fall into the category of
  fabrication.
• A sheet metal, usually up to .25 inches thick
  can be converted into the desired products by
  cutting, stamping, folding, or shaping.
• A few examples of products made by the processes
  are nuts, bolts, hand tools, cutlery and cans,
  metal doors and windows, car parts, and soon.

4
Metal Fabrication Is Used For Making Parts In
Bulk

• Metal fabricators Adelaide uses this process for
  making products in bulk quantities. Products such
  as nuts, bolts, screws, and pipes and pans are
  required in large quantities. These products
  require consistency, but a wide tolerance for
  error also.
• It means, there could be a little difference in
  the parts, but still, they maintain the original
  design and functionality.
• Metal fabrication can also create various
  customized fabricated metal products also. They
  fit business needs.

5
Types Of Metal Fabrication

• If you see check different types of
  fabrications, then we can classify them into
  three primary categories.
• Commercial Fabrication
• It is done to manufacture commercial products.
  All types of goods used by consumers made using
  fabrication techniques fall under this category.
  The most common consumer products are appliances
  and cars. Commercial fabrication is the most
  common and popular category. It is a widely used
  production process.

6
Industrial Fabrication

• It creates pieces that are used for making
  further products or tools. These tools will be
  used for making goods. So, the consumers of these
  products are manufacturers. Therefore, quality
  control has to be far more stringent and precise.

7
Structural Fabrication

• It refers to metalworking, which is done as part
  of the building process. Normally, large-scale
  structural metal fabrication Adelaide project can
  create metal components used by manufacturers,
  buildings, skyscrapers, and shops.
• Each of these categories will use a wide variety
  of procedures and processes. It depends on the
  production methodology. The steps involved in
  that will depend on the complexity or simplicity
  of manufacturing. It is far more than just
  shaping metals.

8
Contact Us

• Address
• 37-39 Lavinia Street, Athol Park
• Adelaide, SA , 5012
• Contact Us
• 088447 4144
• Email
• andrew_at_a1anco.com.au
• Website
• https//www.a1anco.com.au/
• Social link