Canon G4210 Setup Mac - How To Setup

1
Canon Printer Error E02

• An error code occurs to signify an issue in the
• ongoing process. When you encounter the error
  code E02 on your Canon printer, the alarm light
  will glow up in orange. The error code E02
  occurs due to various reasons. When you spot the
  exact reason behind the error code, you can fix
  the issue efficiently. This article lists the
  best troubleshooting techniques that can help
  you fix the error code E02 on your Canon
  printer. Try out all the methods and fix the
  issue without much effort.
• Check the basics

2

• When your Canon printer is out of paper, it
• may show the error code E02. But, you would have
  actually loaded the paper. In that case, remove
  the loaded paper and reload the sheets.
• Before loading the sheets into the paper
  cassette, make sure that you have aligned the
  edges. Once you have loaded the sheets, make
  sure to adjust the guides against the sheets.
• In most instances, wrinkled, curled, or damp
  sheets cause the error code E02. Too thick or
  thin paper also can cause the error code E02.
  Thus, make sure not to load wrinkled, curled,
  damp, too thick, or too thin paper. If you have
  made that mistake, remove such papers and then
  reload proper ones.
• Also, check whether a paper jam has occurred
  anywhere inside the printer. If so, remove all
  the jammed paper from the specific area and

3

• check whether the error code E02 has
• disappeared.
• Clean the paper pick rollers
• When the paper pick rollers fail to pick the
• loaded paper, you will end up with the error
  code E02.
• Thus, clean the paper pick rollers with a
  lint-free cloth.
• Make sure to do a gentle cleaning. If you do a
  harsh cleaning, you might cause permanent damage
  to the rollers.
• Finally, press the Maintenance button and choose
  the Clean Roller option then, press the OK
  button.
• Make sure not to overload the sheets. If you do
  so, your printer will start to malfunction, and
  you will end up with the error codes.
• Check the paper settings
• You should also check whether you have
• selected the correct paper size in the printer
  driver.

4

• Launch the printer driver on your computer
• and check whether you have updated the settings
  correctly.
• In case there is a mismatch in size between the
  loaded paper and the settings, you may encounter
  the error code E02 on your Canon printer. Thus,
  update the settings and check whether the issue
  is fixed.
• Clean the printhead
• When the printheads are not clean, you may
• encounter the error code E02 on your Canon
  printer. Follow these instructions and clean the
  printhead.
• Open the printer cover, and once the carriage
  becomes idle, remove all the cartridges one by
  one.
• Clean the nozzles with a lint-free cloth and
  reinstall the cartridges into the printer. If the
  error persists, replace the ink cartridges with
  new ones.
• Power cycle your printer

5

• In case none of the techniques mentioned
• above work, you can go ahead to power cycle your
  printer.
• To do so, turn off your Canon printer and
  disconnect the power cable. Wait for a minute
  and reconnect the power cable to your printer.
  Now, turn on your printer and check whether the
  error code has disappeared.
• If you cannot resolve the issue yet, get back to
  us for remote assistance.
• To know more ,Click here