Best Solutions to Bug Zapper and Salt Lamp Lighting

1
Best Solutions to Bug Zapper and Salt Lamp
Lighting
2
How to Change the Bulb

• Himalayan salt lamps must use incandescent
  lights. These are heat-producing bulbs. 15 watt
  light bulbs are the most used wattage for salt
  lamps. It is advisable to use a twenty-five watt
  and a forty watt bulb for large salt lamps. What
  wattage works best for salt lamps is a popular
  question. The choice of light bulb for a salt
  lamp will depend on the size of the salt lamp, so
  the solution to this issue is not that
  straightforward.

3
Right Salt Lamp Bulb for Replacement

• Pieces of salt crystal extracted from the
  Himalayan highlands are referred to as salt
  lamps. To create the lamp, the crystals were
  hollowed out, and a light bulb was put into the
  opening. The Himalayan Salt Lamp is a product
  with numerous advantages for our health and
  wellbeing it is not only a lamp. Lamas are a
  constant topic of discussion while discussing
  health and wellbeing at home. Many people use
  salt lamps extensively in practically every room
  of the house due to their many advantages.

4
Replace The Light Bulb in A Himalayan Crystal
Salt Lamp

• Users can follow the instructions in this easy
  fix to take the bulb out of a Spice Lab Himalayan
  crystal salt lamp and replace it. This particular
  manual makes use of an E12 bulb, however other
  versions from other manufacturers might do so and
  be constructed in a different way. Check your
  individual make and model for any additional
  information that might call for further steps.

5
Spice Lab Himalayan Crystal Salt Lamp Bulb
Replacement

• Turn the power switch counterclockwise to stop
  the flow of electricity to the lamp.
• Be sure to unplug the lamp to mitigate the risk.
• Wait 5-10 minutes for bulb to cool before
  continuing.
• Salt lamps, especially this model, are very dense
  and may cause harm to you or those around you if
  they fall.
• Turn the lamp over so that the base is
  accessible.
• Using your hands, remove the black circular
  accessory from the salt lamp.
• Using your fingers, turn the bulb
  counterclockwise to remove it.
• Screw an E12 bulb into the empty socket.