Steps to Fix a Leaking Shower Using Megatreat Shower Sealers

1
Steps to Fix a Leaking Shower Using Megatreat
Shower Sealers
Fixing a leaking shower is incredibly simple. To
fix it, you can use supplies from your
neighbourhood hardware store. However, we
recommend using high-quality Megatreat shower
sealers available in Sydney for a non-messy and
quick application. Using a paintbrush, you can
easily apply the shower sealer to the tiles and
grout. For this, you dont have to remove the
tiles. You can fill in the grout, and your job
is done. To make shower sealing even easier, you
can follow this step-by-step guide. Read on.
The Materials Youll Need 1. Megatreat Shower
Leak Sealer You can choose from Gloss Sealer,
Satin Sealer, and Natural Look Sealer
2

1. Brush We recommend you use natural bristled
   brushes since synthetic or plastic brushes can
   leach colours.
2. Spare Cloth Use a rag or cloth that can easily
   absorb
3. Detergent For cleaning the surface, you can use
   bleach, vinegar, or detergent.

• Optional supplies in the case of grout repairs
• You can use a grout saw, multi-tool attachment,
  or any other sharp tool to scrape the grout.
• Regular superfine grout or sand cement grout.
• Silicone-made joint sealant

• Preparing the area for the process
• Grout Sealing
• First, you must fix any fissures or cracks in the
  grout that are wider than a hairline. If the
  grout is in good shape, you can skip this step.

• Damaged grout repairing
• Patch any holes or cracks in the grout using
  regular superfine or sand cement grout as
  directed on the packaging.
• If the grout is seriously damaged, remove it. In
  this situation, you can use different power
  tools. A grout rake or other similar metal tool
  would do the job. Vaccum or sweep the dust after
  removing the old grout and before applying the
  new grout.

3
Give the grout time to dry thoroughly. This task
will take at least four hours to finish.

• Cleaning
• Use vinegar, detergent, or bleach to scrub away
  any grime, mould, or other particles, then allow
  the surface to air dry. Apply the Megatreat
  shower sealer to a dry and clean surface.

• Steps to Apply Megatreat Shower Sealer for Shower
  Sealing
• If you want to fix the leak, waterproof the tiles
  and grout. For this, use Megatreat shower
  sealer. Pour it into a tray or a bucket to start.
• Apply the shower sealer to the tiles with a brush
  with natural bristles. Give it five minutes to
  settle down.
• Apply the same area with a second coat and give
  it another 5 minutes to settle down.
• Use the clean cloth to remove any excess sealer
  from the previous application.
• Give 12 hours for the Megatreat shower sealer to
  work before using the shower again.
• To ensure complete satisfaction, we recommend
  you apply the shower sealer to another surface
  before using it.

Post Application Place a silicone strip between
the wall and the floor. But carefully follow the
directions on the packaging before application.
The proper application would help
4
in preventing further cracks because of
structural movement. Upon completion of the
entire treatment, the joint should look
fantastic! Thats it! You get a shower that is
entirely water-repellent, mould-resistant, and
easier to clean when the sealer completely dries.
Rest assured that your shower will remain in
good condition for years.
Why Choose Megatreats Shower Sealers in
Sydney? As a reputed shower seal manufacturer in
Sydney, Megatreat has formulated its products to
maintain quality for the best shower seal repair.
All the products have been tested and certified
by the Commonwealth Scientific and Industrial
Research Organisation (C.S.I.R.O.) in
Australia's Laboratories for added peace of mind.
Not to mention, all the shower sealers are
incredibly affordable and come within your
budget. Megatreats shower sealers come in
multiple variants (Satin sealer, Gloss sealer,
and Natural sealer), and they are available in
1-litre, 4-litre, and 10-litre jars. Reference
https//www.zupyak.com/p/3252298/t/steps-to-fix-
a-leaking- shower-using-megatreat-shower-sealers
Megatreat Liquid Stone 88 Port Stephens Drive,
Taylors Beach NSW 2316 Australia
https//www.megatreat.com.au/ sales_at_taskmasterhard
ware.com.au 0249822877