Quick Guide to Berg strip

1
Quick Guide to Berg strip
2
Berg Strip is a type of connector that can be
found on all types of circuit boards. It is also
known as Berg Stick due to its stick-like
structure. The Berg Strip is small and light,
making it easy to connect to a circuit board. One
of the main advantages of the Berg Strip is
that, unlike other connectors, the connector
module can be customized to the designer's
liking. The Burg Strip is easily cut into pieces
with the necessary PINs and arranged in a single
row or row and column fashion. The Berg Strip has
long been a favorite of circuit designers due to
its freedom. They are designed for dependability
and quick assembly. They are also very cheap
connectors. Berg strips can transmit both power
and data. Almost every circuit module, including
GSM modules, GPS modules, Xbee modules, LCD
modules, and circuit boards, uses Berg
strip. Berg strips are available in male and
female connectors, and each has a predetermined
number of pins. The designer then removes all
but the necessary pins and connects them to the
circuit board. It can also be used as a
wire-to-board connector simply solder one of the
connector pins to the wire and secure the other
connector to the circuit board. It can also
function as a wire-to- wire connector if we
solder wires to the pins on both sides of the
pair. They are commonly used as board-to-board
connectors, with the male connector soldered
around the perimeter of the circuit board and
the female connector assembled wherever another
board is to be connected.
3
40x1 Female Berg Strip
Types of B erg strips available
This is a 4 0x1 Pin Female Break Away Header with
an industry- standard spacing of 2.54mm that is
intended for direct soldering into printed
circuit boards. They are best for extending the
pins of microcontrollers and ICs. This 40x1 Berg
Strip Female Connector is intended for use with
custom PCBs or general-purpose custom headers.
This connector can be cut to the length
required. This pin header is an ideal connector
for PCB boards and integrated circuits, which are
commonly used in computers and breadboards. It
has a pitch of 2.54 (the distance between two
pins). This 40-pin connector with a 2.54mm pitch
can be used with any of our LCD, OLED, or VFD
modules, as well as any PCB that requires pin
headers.
4
40x1 Male Berg (90 Degree)
This is a 4 0x1 Pin Male Right Angle Break Away
Header with an industry-standard spacing of
2.54mm that is intended for direct soldering
into printed circuit boards. They are best for
extending the pins of microcontrollers and ICs.
This 40x1 Berg Strip Male Right Angle Connector
is designed for use with custom PCBs and general
custom headers. This connector can be cut to the
length required. This pin header is an ideal
connector for PCB boards and integrated
circuits, which are commonly used in computers
and breadboards. It has a pitch of 2.54 (the
distance between two pins). This 40-pin
connector with a 2.54mm pitch can be used with
any of our LCD, OLED, or VFD modules, as well as
any PCB that requires pin headers. The size of
the header pins should match the size of the
header holes otherwise, the connection will be
loose and easy to loosen. To achieve the actual
number of needles used, it can be cut according
to different needle number requirements. Choose
the header based on the number of pins and pin
spacing required, and insert it directly into
the breadboard to connect or form a
5
40x2 Pin 2.54mm Pitch Male Berg Strip
This is a 4 0x2 Pin Male Break Away Header with
an industry- standard spacing of 2.54mm that is
intended for direct soldering into printed
circuit boards. They are best for extending the
pins of microcontrollers and ICs. This 40x2 Berg
Strip Male Connector is intended for use with
custom PCBs or general-purpose custom headers.
This connector can be cut to the length
required. This pin header is an ideal connector
for PCB boards and integrated circuits, which
are commonly used in computers and breadboards.
It has a pitch of 2.54 (the distance between two
pins). This 40-pin connector with a 2.54mm pitch
can be used with any of our LCD, OLED, or VFD
modules, as well as any PCB that requires pin
headers
6
40x2 Female Berg Strip
This is a 4 0x2 Female Berg Strip Break Away
Header with an industry-standard spacing of
2.54mm that is intended for direct soldering
into printed circuit boards. They are best for
extending the pins of microcontrollers and
ICs. This 40x1 Berg Strip Female Connector is
intended for use with custom PCBs or
general-purpose custom headers. This connector
can be cut to the length required. This pin
header is an ideal connector for PCB boards and
integrated circuits, which are commonly used in
computers and breadboards. It has a pitch of 2.54
(the distance between two pins). This 40-pin
connector with a 2.54mm pitch can be used with
any of our LCD, OLED, or VFD modules, as well as
any PCB that requires it.
7
1x40 2.54mm Pitch Female Berg Strip Header
(Right Angle)
A pair of Berg strips (Male and Female) can be
used to connect two boards. These connectors are
bent at a 90-degree angle, making them suitable
for many applications where the connectors are
frequently used for prototyping. These
connectors are also used on custom PCBs and
general custom headers.
8
40x1 Pin 2.54mm Pitch Male Berg Strip
This is a 4 0x1 Pin Male Break Away Header with
an industry- standard spacing of 2.54mm that is
intended for direct soldering into printed
circuit boards. They are best for extending the
pins of microcontrollers and ICs. This 40x1 Berg
Strip Male Connector is intended for use with
custom PCBs or general-purpose custom headers.
This connector can be cut to the length
required. This pin header is an ideal connector
for PCB boards and integrated circuits, which
are commonly used in computers and breadboards.
It has a pitch of 2.54 (the distance between two
pins). This 40-pin connector with a 2.54mm pitch
can be used with any of our LCD, OLED, or VFD
modules, as well as any PCB that requires pin
headers.