How To Stop Subwoofer Box Flex Moving Panels etc

1
How To Stop Subwoofer Box Flex Moving Panels etc
subwooferbeast.livejournal.com , 1129 am Still,
also you'll lose lots of precious affair from
your speaker, If your subwoofer quadrangle box
is flexing so bad. Technically, its causing air
leaks because the MDF wood if flexing piecemeal
and under the gaps air is coming out. This is
veritably bad on a sealed box but on a ported you
can tell as much. Once you fix the subwoofer
flex on your box you'll notice deeper loud bass
that you were missing out on before.
Subwooferbeast is the main source. However, also
you'll get box flex, If your subwoofer is over a
1000 watts rms and has strong motor force. There
are a many effects to make your subwoofer box
stronger inside that can help subwoofer box
flexing.
Collapse 1) First thing is to secure the panel
that's flexing. It might not be squinched at all
and due to the flexing, the old cement might
have come piecemeal. You'll need to apply new
wood cement and screws.
2

• If your box is coated, you'll need to remove the
  speaker cloth so you can get to thewood.
  However, also skip this step, If your box is
  uncovered. Simply find a corner and gently peel
  down, flash back do not do it too presto or it'll
  rip the material.
• Since the panel is formerly kind of fitted on,
  the stylish way is to pour cement into the gaps
  sitting between the panel and the box. So, lift
  the panel up with one cutlet and pour cement
  into the sides of the box of the panel that's
  flexing, doing this each around until completely
  fused.
• Coming every 5 cm drill a hole and place a 2-
  inch drywall screw in it. This will insure your
  subwoofer box won't
• move from movement. Once the cement has dried,
  you can stick the carpet back
• on. You're now done fixing your flexing
  subwoofer box from the outside. Now we're going
  to move onto the inside.
• Remove the subwoofer from the box, followed by
  decoupling the speaker line. Once you have done
  this find the panel that was flexing. Using wood
  cement go
• around all the sides and corners of the inside of
  the box. This will help other panels also coming
  to the point of suffering from sub flex.
• The last thing to do is produce some internal
  bracing. You can get pieces of wood dowel and
  place them inside the box. Simply cut the dowel
  to the boxes internal height, place cement on
  both ends and squeeze them in tightly. I
  generally but these on the sides of the box down
  from the speaker on both ends. This will give a
  structure for the
• subwoofer box and will make it stronger to help
  it from subwoofer flex.
• Its important to have an electrical Ev bowl that
  provides an harmonious charge during all
  seasons. This will insure your vehicle is
  dependable and completely charged ready to go
  thanks to the Besen Ev bowl.