What to Choose Between Steel and Aluminum Facades

1
WHAT TO CHOOSE BETWEEN STEEL AND ALUMINUM FACADES
ALUMINUM FACADES
STEEL FACADES
Designers builders most commonly use steel
large curtain walls at the main entrance, where
lots of light should come in.
Aluminum is used in areas where energy efficiency
is critical. Aluminum is useful because of its
light weight.
1
Steel's mechanical yield enables the required
glazing portions to be designed with a wide span
and height.
Aluminum can be brushed and polished to achieve a
pleasing surface and a glossy appearance.
2
Aluminium is a very good heat conductor, so often
constructors use it to dissipate heat.
Steel is a very ductile material, making it
simple to weld on-site.
3
Because of the material's mechanical yield,
significant glazing portions with wide spans
heights of up to 15m can be designed.
This material is also corrosion resistant unless
the environment is highly acidic, in which case
it can corrode at a potentially catastrophic rate.
4
Steel cladding protects the architecture from
adverse weather. Temperature, wind, water
absorption, sunlight, pollution.
For skyscrapers, aluminium is considered light
solution. The use of lightweight aluminium
honeycomb panels keeps the building's dead load
low.
5
https//alfafacades.com/