Step-by-Step Window Replacement in Florida.pptx

1
Step-by-Step Window Replacement in Florida
https//misterwindow.com/
2
STEP 1 MEASURE FOR ACCURACY
The first step to window replacement is to get
accurate measurements of the window space. You'll
measure the width first which is the space from
the inside of one side of the jam to the other.
Ideally, you should measure the width at the
bottom, middle and top of the window. You should
also measure the height of the window which is
the space from the top of the window sill to the
bottom of the jam and should be measured at the
left, middle and right of the window.
https//misterwindow.com/
3
Once you have accurate measurements, you can
purchase the window(s) of your choice. Before
you begin installing your new window(s), the next
step is to remove all the window sashes so your
replacement window(s) will fit inside your
existing frame
https//misterwindow.com/
4
STEP 2 CAULKING
Caulk the tops of the window jams on the inside
and outside, install the sill angle and then
caulk the top of the header, or expander, after
you put it on the top of the window.
https//misterwindow.com/
5
STEP 3 WINDOW PLACEMENT
Next, you will put your new window in the
appropriate place and make sure that it lays
square and that screws are installed at the top
and bottom of the side jams and aren't too
tight. Then, you can seal any gaps by sliding
the header up.
https//misterwindow.com/
6
STEP 4 FINAL CAULKING
Lastly, you should do a final caulking inside the
window. There are many variations to replacement
window installations in Florida, and this is as
basic as it gets so, just be sure that if you
are replacing your windows, you have accurate
measurements, all the necessary supplies for a
successful installation and, if necessary, a
handyman or window installation expert ready to
assist.
https//misterwindow.com/
7
Contact Us!
https//misterwindow.com/ 9412160476 1610 12th
Street East Palmetto, Florida 34221 https//www.f
acebook.com/WindowMister/ https//twitter.com/Win
dowMister