10 Bike Maintenance Tips to Extend Your Bike Life - PowerPoint PPT Presentation

About This Presentation
Title:

10 Bike Maintenance Tips to Extend Your Bike Life

Description:

How to extend your bike life? The top ten bike maintenance tips are 1. Check Engine Oil Level 2. Check Tyre Pressure 3. Clean Air Filter. – PowerPoint PPT presentation

Number of Views:5
Updated: 18 November 2022
Slides: 11
Provided by: bikechuno
Category: Other
Tags:

less

Transcript and Presenter's Notes

Title: 10 Bike Maintenance Tips to Extend Your Bike Life


1
10 Bike Maintenance Tips to Extend Your Bike Life
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
2
How to Extend Your Bike Life?
First and foremost, it's important to check your
engine oil level regularly. If the oil level
drops too low, it can cause serious damage to
your engine. You should also check the oil filter
and air filter regularly and replace them if
necessary.
Secondly, keep an eye on your bike tyres. Check
the treads regularly to make sure they are in
good condition and inflate them under the proper
pressure. If you notice any flat spots or cracks,
it's time to get new tyres.
Lastly, don't forget about your bike battery.
Check terminals and cables regularly to ensure
they are clean and free of rust. If your battery
is more than three years old, it's time to
replace it.
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
3
10 BIKE MAINTENANCE TIPS TO EXTEND YOUR BIKE LIFE
  • Check Engine Oil Level
  • Check Tyre Pressure
  • Clean Air Filter
  • Check Bike Transmission
  • Clean and Service Your Bike Regularly
  • Maintain Your Bike Battery
  • Maintain Engine and Clean Carburetor
  • Adjust Bike Clutch
  • Replace Brake Shoe/Pads
  • Ride at Slow Speed

Bikechuno.com
_at_Bikechuno
_at_Bikechuno
4
1. Check Engine Oil Level
It is important to check your engine oil level
regularly, as it can affect the performance of
your vehicle. Low oil levels can damage the
engine, so it's best to keep an eye on it. To
check your engine oil level, simply remove the
dipstick from the engine and clean it. Put it
back in the engine and take it out again to check
the oil level. If it is low, top it off with the
right type of oil.
2. Check Tyre Pressure
The most important thing you can do to maintain
the safety and performance of your bike is to
check tyre pressure regularly. Incorrect tyre
pressure can lead to many problems, including
decreased fuel efficiency, reduced handling,
braking ability, and increased wear and tear in
tyres.
_at_Bikechuno
_at_Bikechuno
Bikechuno.com
5
3. Clean Air Filter
A clean air filter is important to extend the
engine life. First, it allows the engine to
breathe properly and run smoothly. Second, it
helps improve fuel efficiency. Third, it helps to
extend the life of the engine. Fourth, it helps
to keep the environment clean by reducing
emissions. Fifth, it helps to keep the rider safe
by preventing dirt and debris from entering the
engine.
4. Check Bike Transmission
To ensure that your bike's transmission is in
good working condition, it is essential to
inspect it regularly. You should check the
condition of the chain, sprockets, and gears, and
make sure that there is no excessive wear or
damage. It is also essential to check the
transmission fluid level and condition and ensure
that there are no leaks.
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
6
5. Maintain Your Bike Battery
Keeping your bike battery in good condition
requires proper care. This includes cleaning it
regularly and making sure it has enough
electrolytes. You should also avoid discharging
it too much, as this can damage the battery. If
you need to replace your bike battery, make sure
it is compatible with your bike.
6. Clean and Service Your Bike Regularly
If you ride your bike regularly, it's important
to clean and service it regularly. This will help
to keep it in good condition and ensure that it
performs well. While cleaning pay particular
attention to the chain and brake shoes, as these
are the parts that are most likely to get dirty
and require regular cleaning. Once you've cleaned
your bike, you should then carry out a basic
service.
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
7
7. Maintain Engine and Clean Carburetor
Your bike's engine carburetor is one of the most
important parts of your engine, and keeping it
clean is essential to keeping your engine running
smoothly. First, remove the carburetor from the
engine and disassemble it. Next, use carburetor
cleaner to clean all parts of the carburetor. Be
sure to pay special attention to jets, as they
can become clogged with dirt and debris. Once
everything is clean, reassemble the carburetor
and reinstall it on the engine.
8. Avoid Parking in the Sunlight
Maintaining your bike clutch regularly can
improve the performance of your bike. When your
clutch is serviced, make sure it has a proper
amount of free play.
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
8
9. Replace Brake Shoe/Pads
It is important to keep your bike brakes at the
proper distance. Making sure they are not too
tight or too loose is an important safety
concern. If your brakes are squeaky, replace them
as soon as possible.
10. Ride at Slow Speed
Slow riding can improve your bike's engine
efficiency over time, as it allows the engine to
run more smoothly and with less resistance. In
addition, riding at a slower speed reduces fuel
consumption, allowing you to enjoy an
eco-friendly and economical journey.
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
9
For More Information, Please Visit
www.bikechuno.com
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
10
THANK YOU!!
Bikechuno.com
_at_Bikechuno
_at_Bikechuno
Write a Comment
User Comments (0)
About PowerShow.com