Hot Insulation: Find The Right Heat Management Material

1
Hot Insulation How to Find The Right Heat
Management Material
To carry out your hot insulation work, you will
need to find a recognized craftsman to receive
energy renovation aid. Another step in your
renovation work find the materials you will use
for your hot insulation. This selection of
thermal insulation materials is necessary to find
the one that best suits your needs. Today, this
article helps you to make a point between the
different insulators and gives you the advice to
choose the one that suits you best!
Five major categories of insulation A thermal
insulator is a hot insulation material that has a
dual function it allows both to prevent the
heat from entering in the summer and also
maintains this heat during the winter by
preventing the cold from entering your home.
Thermal insulators can be classified into five
main families Mineral insulation
2
These are the best-known insulators it is glass
wool or rockwool insulation. Natural
insulators These insulators, made up of wood
fiber, cork, or linen, are also widely used in
insulation work. Synthetic insulation It is
either polystyrene or polyurethane. Thin or
multilayer insulation These insulators are rather
considered additional insulation. These are
insulators that are not really enough to obtain
a good energy performance diagnosis. The
so-called new generation insulators They are
relatively recent on the market the most widely
used are single-wall bricks. These brick walls,
approximately 35 to 40cm thick, use thermal
pallet covers. This category also includes
cellular concrete, insulating formwork,
insulating paints, and even airgel. Choosing the
Right Heat Management Material Understand the
magic formula R e/? To properly insulate your
home, the hot insulation in piping must be energy
efficient to limit heat loss in winter and
coolness in summer. For this, the insulators
each have their own thermal resistance (denoted
R). Thermal
3

• resistance is expressed in square meters and
  Kelvin (unit of thermal temperature) per watt
  (noted m2.K/W).
• It is calculated by dividing the thickness of the
  insulation (noted e and expressed in meters) by
  the thermal conductivity (noted ? and expressed
  in watt per meter and Kelvin (W/mK)), which
  determines the capacity of the material to
  transmit the heat or not. To ensure that your
  insulator is effective, its resistance R must be
  high, and its conductivity ? must be low.
• The reaction to fire is also a criterion to
  consider for your insulation Class A1 for the
  most resistant insulation to class F for the
  least resistant gives you an indication of the
  fire resistance. A mandatory marking and
  certification must indicate these elements
  concerning your hot insulation.
• The different types of insulation
• There are different types of hot insulation for
  your home
• Insulators of mineral origin (glass wool, rock
  wool, cellular glass, etc.)
• Biosourced insulation ( of plant or mineral
  origin cellulose, hemp, wood, etc.)
• Organic insulators ( polystyrene, polyurethane,
  etc.) may present a risk of toxic smoke in a
  fire.
• Reflective products, which are rather thin
  insulators to be used in addition to insulation

4
Ask an expert for advice. The recognized
tradesman you choose for your hot insulation work
can help you choose your hot insulation best. Do
not hesitate to ask him for advice during his
mandatory technical visit, which precedes the hot
insulation work. Depending on your budget, your
requests, and the configuration of the space to
be insulated, he can give you personalized
advice for your hot insulation and refractory
lining in furnaces. Similarly, for boiler
replacement work, the advice of a professional
can be useful, especially for the calibration of
your boiler. Check that your insulation is
eligible for the tax credit. Various tax credit
schemes entitle you to get a reduction in the
cost of labor and materials used for your
renovation work. But for your work to be eligible
for this tax credit, your craftsman must be
recognized, and your lrb insulation must meet
certain conditions. Its resistance must be at
least equal to or greater than 7 for lost
attics, 6 for converted attics, 3.7 for the
walls, and 3 for the floor. The most common
types of insulation eligible for the tax credit
are glass, rock, hemp, cotton, wood, sheepskin,
linen, PSE or XPS polystyrene, cork, duck
feathers, polyurethane, wood fiber, cellulose
wadding, recycled textiles, cellular glass, thin
insulation.
Source Link
https//www.statusthoughts.com/hot-insulation-righ
t-heat-
management-material/