Structural Foam: The Essential Equipment for Safe Flying

1
Structural Foam The Essential Equipment for Safe
Flying
By - https//www.tmi-slc.com/
2

• Structural foam is a crucial element in
  aircraft manufacturing.
• It's used to create the parts that hold
  together the body of an aircraft, and it also
  helps to insulate against temperature changes.
  This material is especially important in
  airplanes because it allows for greater weight
  capacity and lower fuel consumption.

3

• This composite material was first developed by
  NASA in order to improve safety for astronauts
  flying in space. During the early 1960s, there
  were many experiments conducted with rockets that
  required people to go into space for long periods
  of time without any protection from things like
  radiation or micrometeorites (tiny pieces of
  debris). In order for these astronauts to
  survive, it became necessary for them to have a
  suit that would protect them from these dangers
  while still allowing them freedom of movement so
  they could do their jobs inside the spacecraft.

4

• Aircraft structural foam is created through
  the use of polyurethane or polystyrene, which are
  both strong, lightweight plastics. The process of
  manufacturing aircraft structural foam starts
  with mixing these two materials together into a
  liquid form so that they can be poured into
  molds. Once the molds have been filled, they're
  heated until the liquid turns into solid foam.
  Once it's cooled down again, the molds are opened
  up and removed from their position within the
  machine.

5

• Structural foam is a polyurethane composite
  that is used in the construction of aircraft. It
  can be used to coat the wings and fuselage of an
  airplane in order to prevent damage to these
  important parts. Structural foam is also used in
  the construction of boats and submarines because
  it provides insulation, support and buoyancy.

6

• The major purpose of aircraft structural foam
  is to protect the airframe from damage while
  flying at high speeds. The material is molded
  into different shapes to fit specific areas on an
  airplane's body. This is done by using a special
  machine known as an injection molder. The machine
  will inject plastic into a mold and cure it under
  intense heat until it becomes solid.

7

• Technology Marketing provides aircraft
  structural foam and other composite materials for
  the aerospace and military industries who need
  long-lasting and protected supplies and
  aircrafts. Our products are tested and proven in
  the most rigorous of circumstances so that you
  can be sure your machinery will be protected no
  matter the situation. No matter which of our
  excellent composite materials suits your
  particular industrys needs, Technology Marketing
  is ready to help your company stay efficient and
  productive.