Glass product final quality control in China

1
Glass product final quality control in China
2
Randomly selected samples Samples were randomly
taken from different trays or cartons. Check
product workmanship, specifications, dimensions,
and conduct corresponding tests.
3

• Glass products are broken, burst, gap, scraper
  must not accept.
• Glass products can not be deformed, mouth, bottom
  uneven and crooked.
• Bright glass can not be mixed with recycled
  materials, the product heart must be transparent
  and white, no other miscellaneous colors, the
  color of the colored glass to be stable, pure,
  uniform.
• Whether manual blowing or machine blowing, the
  thickness of the glass should be average, not
  thin and thick.
• The glass material should be melted well and
  evenly, as far as possible to avoid stones
  (unmelted slag), streaks. Bubble and other
  defects.
• There can be no bubbles above 1CM of glassware
  (except for bubble effect glass).

4
(No Transcript)
5

• Inspection method
• 1. The general appearance inspection must be
  carried out under the fluorescent lamp, the color
  difference must be determined under the standard
  light source box, the standard indoor light
  source is used and the sample is placed about
  half a hand distance from the eye (about 8
  inches), and the inspection time of each
  accessory is about 3-4 seconds.
• 2. Size measurement according to the
  requirements of the drawing measurement.
• A. Measure dimensions with vernier calipers.
• B. Combination parts according to the
  requirements of the drawing measurement, if there
  is a deviation of 0.5mm, quality assurance
  according to the situation for acceptance, return
  judgment If the deviation is more than 0.5mm,
  quality assurance will make special selection,
  selection and return judgment according to the
  situation.

6
(No Transcript)
7
Measured data(Product size,Outer Carton size and
weights)
8
(No Transcript)
9
(No Transcript)
10
Special test for glass products.
11
(No Transcript)
12
(No Transcript)
13
Packing check(color box,outer cartons.)
14
(No Transcript)
15

• Inspection Report
• The inspection report shows the situation at the
  inspection site. Check and verify that the goods
  meet the requirements of size, weight, packing
  and workmanship according to the information
  provided by customer. Work is good, function test
  is normal. After reading the report, customers
  can accurately judge whether the goods meet the
  requirements of the order.

16

• Eagle Eyes Quality Inspection Co.,Ltd.
• Eagle Eyes, Watch Your Quality All The Time!!!
• Office 0086-596-6718-300
• Mobile [phone]
• Email service_at_china-qualityinspection.com
• Websitehttps//www.china-qualityinspection.com/
• Websitehttps//www.china-quality-inspection.com/