Hydraulic Broom Installation Process – Atlas Industries

1
This site was designed with the .com website
builder. Create your website today. Start Now
Atlas Industries Civil and Road Construction
Machinery Manufacturer Asphalt Batch Plant
Wet Mix Plant Atlas Industries
Get In Touch
Home Blog Products
contact_at_atlasindustries.in 09723810565
Log in / Sign up
ready mix concrete asphalt batch CONCRETE PLANTS
road cleaning machines
All Posts
Atlas Industries Sep 4, 2022 2 min read
Hydraulic Broom Installation Process Atlas
Industries
Hydraulic broom is very convenient and easy to
use a type of road sweeper. The hydraulic broom
installation process is simple. Many road
contractors and maintenance personnel prefer
the simplicity of the hydraulic road cleaning
machine. It can be conveniently attached to
most of the tractors and used. It is a tractor
towable road sweeping broom. Tractor requirement
is simple, mostly 35 to 50 HP tractor is
suf?cient. Massey Fergusons make of tractor is
not adjustable for the broom. Any tractor that
has a hydraulic pump outside will be suitable for
use with a hydraulic broom. Below is the
hydraulic broom connection diagram
Before we start with the ?tting of Atlas
hydraulic road sweeper to the suitable tractor,
we will need to understand the hydraulic control
valve basics. Below is the self-explanatory
image. The image shows the marked pressure line,
tank (return) line, and two hydraulic control
spools. One of them is the detaining (lock) type
it is for the hydro motor. The other is for
spring type it is for a hydraulic
cylinder. Engaging the spool will give an idea
if it is a spring-type or detain type.
2
The next step is to ?x the hex nipples using
Te?on tape. These nipples have to be ?tted at the
hydro motor. After that, we need to connect the
2 hydraulic hose pipes coming from the detain
(lock) type spool into the hydro motor. Then
cross-check the spool type on the hydraulic
control valve. Connect the remaining 2 hydraulic
hose pipes into the hydraulic cylinder of the
hydraulic road sweeper. The other end of these
hose pipes will be connected to spring-type spool
into the control valve. The next step is to
connect the hydraulic broom to the tractor. See
video below for complete details on how to
install the hydraulic broom to tractor
After the connection of the hydraulic broom to
the tractor, the next step will be to connect the
hydraulic road sweeping machines hydraulic line
with that of the tractor. We have to locate the
tractors hydro pumps pressure line. It should
be near the tractor driver seat. Then we have to
cut the pipeline and weld hydraulic hex nipple
both sides. It is provided in the box with the
broom. Connect the hydraulic hose, one end to
control valve P line on the broom and other ends
to the hex nipple on the tractors P (pressure)
line. P to P After that we have to connect
another hydraulic hose, one end to control valve
T line and other ends to the tractors T
(return) line. ATLAS Hydraulic Brooms can be
conveniently moved by attaching at the rear of a
tractor. All the parts used in this road sweeper
are highly durable and suited for tough Indian
conditions. Operating and maintenance of this
hydraulic road sweeper is easy and does not
require skilled labour. ATLAS Hydraulic Sweepers
come with a sweeping width of 2.10 meters and can
be operated conveniently with the hydraulic
drive of the tractor. Its cleaning width is 2.10
metres.
Hydraulic Broom Installation Process
Broom Manufacturer and Exporter
Hydraulic Broom Suppliers
Hydraulic Broom
0 views 0 comments
3
Atlas Industries contact_at_atlasindustries.in
09723810565 Plot No. 14/1, G.I.D.C. II,
Dediyasan, Mehsana - 384004, Gujarat, India
2020 by Atlas Industries. Proudly created with
Wix.com