Flood Light DS - KrutLED Wholeslaler

1
Article No Version Prepared By Checked By

06.23
K - OD SERIES LED FLOOD LIGHT
V A R I A N T S
Wattage Product Code Operating Temperature
15W KL-FL06E-15WXYA1 -30C To 45C
30W KL-FL06E-30WXYA1 -30C To 45C
50W KL-FL06E-50WXYA1 -30C To 45C
80W KL-FL06E-80WXYA1 -30C To 45C
Flood lights provide powerful, wide-angle
illumination, ?ooding any space with brightness.
Designed for outdoor use, these lights o?er
high-intensity lighting, ensuring optimal
visibility and security. With their robust
construction and weather-resistant features, ?ood
lights are built to withstand the elements.
Whether for residential or commercial
applications, ?ood lights are essential for
enhancing safety, illuminating large areas, and
creating a well-lit environment. Experience the
reliability and versatility of ?ood lights,
illuminating your surroundings with clarity and
peace of mind.
A P P L I C A T I O N S
Warehouse/Storage Spaces Architectural Lightning
Sports and Recreation Construction
Sites Outdoor Security Event Lightning
F E A T U R E S
Compatibility with smart home systems for
seamless integration and control.
Weather-resistant construction for durability in
outdoor environments. Motion sensor options for
enhanced security and energy conservation. Long
lifespan for extended usage and reduced
maintenance. Adjustable direction and angle for
versatile lighting options. Easy installation
and mounting options for convenience. High-intensi
ty illumination for wide coverage.
Energy-efficient operation for cost savings.
gt80
WARRANTY
RATED LIFE
CRI
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com
2
Article No Version Prepared By Checked By

06.23
T E C H S P E C S
Wattage 15W 30W 50W 80W
Input Voltage Range 120-277 VAC 120-277 VAC 120-277 VAC 120-277 VAC
Input Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Power Factor gt 0.9 gt 0.9 gt 0.9 gt 0.9
THDA 20 20 20 20
Dimming 0-10V 0-10V 0-10V 0-10V
Minimum Dimming 0 0 0 0
Driver Type (CC/CV) CC CC CC CC
Surge Projection (CM) 2.5KV 2.5KV 2.5KV 2.5KV
Surge Projection (DM) 2.5KV 2.5KV 2.5KV 2.5KV
Driver Output Voltage 60-80V 60-80V 60-80V 60-80V
Driver Output Current 200mA 380mA 640mA 1050mA
Driver Output Ripple Current lt 10 lt 10 lt 10 lt 10
Driver Efficiency gt 85 gt 88 gt 88 gt 90
O P T I C A L P A R A M E T E R S P A R A M E T E R S
Wattage 15W 30W 50W 80W
Total Lumens (Min) 1880LM 4080LM 6350LM 10160LM
Lumens Efficiency (Min) 130LM/W 136LM/W 127LM/W 127LM/W
Product CCT 5000K 5000K 5000K 5000K
CCT Range 5028K 283 5028K 283 5028K 283 5028K 283
Product CRI gt 80 Ra gt 80 Ra gt 80 Ra gt 80 Ra
Product Beam Angle 150 150 150 150
M E C H A N I C A L P A R A M E T E R S M E C H A N I C A L P A R A M E T E R S
Wattage 15W 30W 50W 80W
Product Dim. (mm) 111 X 39 X 149MM 182 X 45 X 218MM 182 X 45 X 218MM 217 X 50 X 243MM
Ingress Protection IP65 IP65 IP65 IP65
IK Protection IK08 IK08 IK08 IK08
Housing Type Die-cast aluminum Die-cast aluminum Die-cast aluminum Die-cast aluminum
Housing Weight 180g 430g 430g 600g
Product Net Weight 0.48kg 1.1kg 1.1kg 1.5kg
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com
3
Article No Version Prepared By Checked By

06.23
D I M E N S I O N S
S H I P P I N G S H I P P I N G S H I P P I N G S H I P P I N G S H I P P I N G
Wattage 15W 30W 50W 80W
Product Dim. (in) 4.37 x 1.53 x 5.86 7.16 x 1.77 x 8.58 7.16 x 1.77 x 8.58 8.54 x 1.96 x 9.56
Case Lot 16 8 8 6
Master Carton Dim. (in) 4.37 x24.48 x 5.86 7.16 x 14.16 x8.58 7.16 x 14.16 x8.58 8.54 x 11.76 x 9.56
Master Carton Weight(lbs) 16.93 19.4 19.4 20.84
40 Feet HQ Container (Case) 7314 5148 5148 4730
Per Pallet (Case) 75 50 50 40
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com
4
Article No Version Prepared By Checked By

06.23
I N S T A L L A T I O N G U I D E
Wiring diagram
Installation 1 Installation with adjustable
fitter 1.1 Adjustable fitter mounting ( b AM
suitable for 15W) Step 1 Take the lamp out of
package Step 2 Pass the three wires through
rubber mat (figure 1.1) Step 3 Match the hole
of rubber mat with bracket, pass the wires
through and fix it with screws (Watch out not to
scratch the wire) (figure 1.2) Step 4 Fix it
with screws. (Watch out not to scratch the wire)
(figure 1.3)
1.2 Adjustable fitter mounting (b AM suitable
for 30W, 50W) Step 1 Take the lamp out of
package Step 2 Pass the wires through hardware
and fix it with screws (figure 1.4) Step 3
Pass the wires through from the other bracket and
rubber, fix it with screws (Watch out not to
scratch the wire) (figure 1.5) Step 4
finished. (figure 1.6)
1.3 Installation of led lamp with adjustable
fitter (b AM suitable for 15W, 30W, 50W) Step
1 Take the lamp out of package Step 2
Connect the wires properly according to the right
wiring requirements (pay attention to positive
wire, negative wire and ground wire), and then
put the wires into lamp pole (figure 1.7) Step
3 Loosen the screws, adjust the lamp angles as
per actual demands and then tighten the screws
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com
5
Article No Version Prepared By Checked By

06.23
I N S T A L L A T I O N G U I D E
Installation 2 Installation with yoke mount 2.1
Yoke Mount installation (b YM suitable for all
power of this series) Step 1 Take the lamp out
of package Step 2 Pass the wires through hole
of bracket (figure 2.1) Step 3 Fix the lamp
and bracket together with screws (Watch out not
to scratch the wire) (figure 2.2) Step 4
Tighten the other bracket with screws (figure 2.3)
2.2 Installation of led lamp with Yoke Mount(bYM
suitable for all power Of this series) Step 1
Take the lamp out of package Step 2 Connect
the wires properly according to the right wiring
requirements (pay attention to positive wire,
negative wire, and ground wire), and then put the
wires into lamp pole (figure 2.4) Step 3
Loosen the screws, adjust the lamp angles as per
actual demands and then tighten the screws
(figure 2.5)

• Installation 3 Installation with Flood Mount
• Flood Mount Installation (bFM suitable for all
  power of this series) Step 1 Take the lamp out
  of package( figure 3.1)
• Step 2 Tighten the brackets and screws. (figure
  3.2)
• Installation of led lamp with ?ood mount(bFM
  suitable for all power Of this series) Step 1
  Take the lamp out of package
• Step 2 Connect the wires properly according to
  the right wiring requirements (pay attention to
• positive wire, negative wire, and ground wire),
  and then put the wires into lamp pole (figure
  3.3) Step 3 Loosen the screws, adjust the lamp
  angles as per actual demands and then tighten the
  screws
• (figure 3.4)

All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com