Mirror production inspection service in Fuzhou,Fujian,Qufu,China

1
Mirror production inspection service in
Fuzhou,Fujian,Qufu,China
2
Randomly selected samples Samples were randomly
taken from the production line. Inspector will
check the quality, the size, the weight, function
ect.
3

• Inspection standards for mirror products
• 1. Any defects that cause harm to users in actual
  use are not allowed.
• 2. Must comply with shipping market regulations
  and customer requirements.
• 3. Product functions must meet customer
  requirements or be consistent with the sample.
• 4. There shall be no appearance defects such as
  damage, breakage, abrasion, or fragmentation.
• 5. The mark/label on the product must comply with
  the regulatory requirements and be clear and
  clear.
• 6. The structure, appearance and material of the
  product must meet the requirements of the
  customer or be consistent with the sample.
• 7. The product should be sufficiently packed with
  materials of sufficient strength so that the
  goods can reach the destination warehouse in a
  marketable state.

4
Inspection standards for mirror products

• 1. When stitching the border with the mirror, the
  four corners must be vertical, and the filling
  material at all joints must be ground flat, and
  there can be no cracks.
• 2. The bottom and surface of the mirror must be
  perfectly stitched, there must be no cracks, and
  all kinds of joints must be seamless.
• 3. The outer frame of the mirror must be complete
  wood, and the frame cannot be spliced.
• 4. The quality of the packaging cardboard is
  good, (low recycling material), and must be able
  to withstand the weight of the mirror.
• 5. Need to use high-definition pixel photos, take
  some pictures of the front and back of the
  mirror, and take pictures of the joint of the
  mirror and the border.

5

• Mirror packaging inspection standards
• 1. Box wheat, bar code, label (e.g. price tag)
  should conform to customer requirements or
  consistent with the sample.
• 2. Packaging materials can prevent damage to the
  goods during transportation.
• 3. Diagrams, instructions, labels, warnings, etc.
  shall be clearly printed in the user language.
• 4. Packaging must meet customer's requirements or
  be consistent with the sample.
• 5. The diagrams and instructions on the package
  must be consistent with the actual product and
  function.
• 6. Cartons packing materials and methods must be
  approved by the customer.

6
(No Transcript)
7
Measured data(Product size,Outer Carton size,
Weight etc)
8
Special test for toy products.
9
(No Transcript)
10
Packing check(color box,outer cartons.)
11

• Production Monitoring Report
• The report shows the situation at the inspection
  site. Check and verify that the goods meet the
  requirements of size, weight, packing and
  workmanship according to the information provided
  by customer. Work is good, function test is
  normal. After reading the report, customers can
  accurately judge whether the goods meet the
  requirements of the order.

12

• Eagle Eyes Quality Inspection Co.,Ltd.
• Eagle Eyes, Watch Your Quality All The Time!!!
• Office 0086-596-6718-300
• Mobile[phone]
• Email cs01_at_china-qualityinspection.com
• Website https//www.china-quality-inspection.com
• https//www.china-qualityinspection
  .com