QUICK GUIDE TO ATOSA COMMERCIAL REFRIGERATORS DIXELL CONTROLLER

1
QUICK GUIDE TO ATOSA COMMERCIAL REFRIGERATORS
DIXELL CONTROLLER
2

• In todays fast-paced restaurant industry,
  maintaining precise control over temperature is
  crucial for ensuring the quality and safety of
  your ingredients. Atosa commercial refrigerators
  equipped with Dixell controllers offer advanced
  temperature management features that empower you
  to keep your ingredients in their optimal
  condition.
• In this guide, we will walk you through the
  essential steps for setting and controlling
  temperatures using the Dixell controllers on your
  Atosa commercial refrigerators and freezers.
  Whether youre a seasoned chef or a restaurant
  owner, mastering these controls will help you
  enhance the efficiency and performance of your
  refrigeration units. Lets begin.

3

• Please note that your new food equipment has been
  calibrated, configured, and tested at the
  factory. If you wish to adjust these settings, we
  recommend consulting your dealer to ensure that
  any changes do not compromise your warranty.
• Setting Temperature on Commercial Freezers or
  Fridges with Dixell Controllers
• Static temperatures are the simplest way to
  ensure your fridges or freezers provide
  predictable cooling. You can set a static
  temperature in the following way

4

• 1. Press the SET button and hold it until the
  temperature value starts blinking.
• 2. Use the UP or DOWN arrow buttons to increase
  or decrease the temperature to the desired
  number.
• 3. Press the SET button again to finalize your
  decision and lock in the temperature.
• Setting the Temperature Difference With the OT
  Function
• The OT function on the Dixell controller allows
  you to set a temperature difference between the
  outside and inside reader. For example, if you
  place your temperature difference to two, and the
  temperature reader shows 38 degrees, the inside
  temperature will be 36 degrees.

5

• 1. Press and hold the DOWN arrow and the SET
  button simultaneously.
• 2. Once this process starts, the monitor should
  read nP, but you must keep holding these
  buttons until the reading changes to L2.
• 3. Once you release, the monitor should read
  HY do not panic. This reading is correct.
• 4. Press the UP arrow button until you see OT
  on the screen.
• 5. Press SET, and you should see a number. This
  number is the current temperature difference. The
  default is 0.
• 6. Use the UP or DOWN arrow buttons to increase
  or decrease the temperature difference to the
  desired number.

6

• 7. Press SET, and the monitor will flash and
  return you to the home screen.
• 8. Let the device idle, and it should return its
  temperature reading screen.
• Setting the Low Setting on Your Atosa Fridge,
  Freezer, or Cooler
• The low setting specifies the lowest temperature
  the fridge is allowed to reach.
• 1. Press and hold the DOWN arrow and the SET
  button simultaneously.
• 2. Once this process starts, the monitor should
  read nP, but you must keep holding these
  buttons until the reading changes to L2.
• 3. Once you release, the monitor should read
  HY, do not panic-this is correct.

7

• 4. Press the UP arrow button until you see L2
  on the screen.
• 5. Press SET, and you should see a numberthe
  current lowest temperature setting.
• 6. Use the UP or DOWN arrow buttons to increase
  or decrease the low temperature to the desired
  number.
• 7. Press SET, and the monitor will flash and
  return you to the home screen.
• 7. Let the device idle, and it should return its
  temperature reading screen.

8

• Setting the High Setting on Your Atosa Fridge,
  Freezer, or Cooler
• The high setting specifies the maximum
  temperature the unit may reach and when the
  units cooling will activate.
• 1. Press and hold the DOWN arrow and the SET
  button simultaneously.
• 2. Once this process starts, the monitor should
  read nP, but you must keep holding these
  buttons until the reading changes to L2.
• 3. Once you release, the monitor should read
  HY, do not panic this is correct.
• 4. Press the UP arrow button until you see US
  on the screen.

9

• 5. Press SET, and you should see a number. This
  number is the current highest temperature
  setting.
• 6. Use the UP or DOWN arrow buttons to increase
  or decrease the high temperature to the desired
  setting.
• 7. Press SET, and the monitor will flash and
  return you to the home screen.
• 8. Let the device idle, and it should return its
  temperature reading screen.

10

• Setting Your Atosa Units Fan Control
• You can control your units fans for better
  control over the evaporator and condenser.
  However, this segment will only show how to keep
  the evaporator running even during defrosting.
• 1. Press and hold the DOWN arrow and the SET
  button together.
• 2. Once this process starts, the monitor should
  read nP, but you must keep holding these
  buttons until the reading changes to L2.
• 3. Once you release, the monitor should read
  HY, do not panic this is correct.

11

• 4. Press the UP arrow button until you see FC
  on the screen.
• 5. Press SET and the monitor should read CY.
• 6. Press the UP arrow key, and the monitor should
  read OY.
• 7. Press SET, and the monitor will flash and
  return you to the home screen.
• 8. Let the device idle, and it should return to
  its temperature reading screen.

12

• Bonus Tip Manual Defrosting of Your Atosa Fridge
  or Freezer
• You can manually defrost your appliance by
  pressing and holding the DOWN arrow button for at
  least three seconds.
• Purchase All Your Commercial Kitchen Equipment
  From The FED (Foodservice Equipment Depot)
• If you need any commercial kitchen equipment, you
  will want to browse our extensive range of
  options. Fast Frictionless online ordering for
  professional quality food service equipment.