Reviving a Vehicle: The Complete Guide to Jump-Starting a Car

1
STEPS TO JUMP START A CAR
Battery Boost Service In Detroit Tips By Tow-Tow
2
WHAT IS JUMP STARTING A CAR?
Jump starting a car is a common technique used to
start a vehicle with a dead or discharged
battery. This process involves using another
vehicle's battery and cables to provide the
necessary electrical charge to start the disabled
car. Here's a step-by-step guide on how to jump
start a car
3

• Jumper Cables Ensure they are in good condition
  and have sufficient length.
• Another Vehicle The donor vehicle should have a
  charged battery.

MATErials Needed
4
STEPS TO JUMP START A CAR

• Safety First
• Park the vehicles close enough for the jumper
  cables to reach but not touching.
• Both vehicles should be in "Park" or "Neutral"
  with their ignitions turned off.

• Identify Battery Terminals
• Locate the batteries and identify the positive
  () and negative (-) terminals on each battery.
• The positive terminal is usually marked with a
  "," and the negative terminal with a "-."

5

• Connect one end of the red (positive) jumper
  cable to the positive terminal of the dead
  battery.
• Connect the other end of the red jumper cable to
  the positive terminal of the donor vehicle's
  battery.
• Connect one end of the black (negative) jumper
  cable to the negative terminal of the donor
  vehicle's battery.
• IMPORTANT Connect the other end of the black
  jumper cable to an unpainted metal surface on the
  dead car. This could be a bolt or bracket away
  from the battery. Do not connect it directly to
  the negative terminal of the dead battery.

ATTACH JUMPER CABLES
6
Start the Donor Vehicle

• Start the engine of the donor vehicle and let it
  run for a few minutes.

Attempt to Start the Dead Vehicle

• Try to start the vehicle with the dead battery.
  If it doesn't start, wait a few more minutes and
  try again.

7

• Remove Cables in Reverse Order
• Once the dead vehicle starts, carefully remove
  the jumper cables in reverse order.
• Start by disconnecting the black jumper cable
  from the previously dead car's chassis.
• Then remove the black jumper cable from the donor
  vehicle's battery.
• Remove the red jumper cable from the donor
  vehicle's battery.
• Finally, disconnect the red jumper cable from the
  previously dead car's battery.

8

• Tips and Precautions
• Ensure the jumper cables do not touch each other
  during the process.
• Avoid connecting the negative cable to the dead
  battery's negative terminal to reduce the risk of
  sparks near the battery.
• If the vehicle still doesn't start after a few
  attempts, there may be other issues, and
  professional assistance may be needed.
• By following these steps carefully, you can
  safely jump start a car and boost its battery.

9
(No Transcript)