10 Easy Steps for Replacing Car Tyre at Home

1
10 Easy Steps for Replacing Car Tyre at Home
2
Position Vehicle Prep Area
Park on level ground and prep a clean area to
work. Put on gloves, eye protection.
3
Loosen Lug Nuts
While the wheel is still on the ground, use your
tyre iron or impact wrench to slightly loosen the
lug nuts securing it.
4
Jack up Vehicle
Position jack underneath vehicle at approved
jacking points and raise until wheel is just off
the ground.
5
Remove Lug Nuts Wheel
With the vehicle weight no longer on it, finish
unscrewing lug nuts with your fingers/tool and
take off the wheel.
6
Remove Old Tyre
Deflate completely. Then push the beads in from
the sides to unseat the tyre edges. Lift off rim.
7
Install New Tyre
Fit one tyre bead edge into the outer rim lip.
Then use a lubricant and tyre irons to ease the
reliable tyre replacement services without
twisting or damaging the rubber.
8
Reattach Secure Wheel
Place wheel flush back on vehicle hub and perform
up an initial hand tighten of lug nuts to
temporarily hold it in place.
9
Recheck Torque
After a short drive, recheck torque settings and
finally consider getting a wheel alignment done
to maximize lifespan.
10
Lower Vehicle
Raising the jack back down until the full vehicle
weight holds the newly fitted wheel in place.
11
Torque Lug Nuts
Using a torque wrench, tighten bolts to spec in
opposite star pattern. Double check each.
12
Always put safety first with axle stands
supporting vehicles and by matching new tyres to
existing wheel sizes. Seek 24hr Mobile Tyre
repair London professional assistance if unsure
during any points of mobile tyre replacement in
London.
13
020 8050 9?024
info_at_mobiletyrerepairlondon?.co.uk
www.mobiletyrerepairlondon.co.uk